I haven't fully started working on anything, just kind of poking around until I have free time over the summer, but I just wanted to give a really quick update:
FOR ACTUAL PROJECT UPDATES I WILL BE UPDATING THIS SITE (SEMI-REGULARLY) -> http://skybreakr.tumblr.com/
>> Started on the mixer design and I'm using a design from the All Electric Kitchen as a base (http://all-electric.com/b&c.html > Simple Mixer Circuits)
What it looks like its going to turn out to be is 4 (3 if the design gets too complex/expensive) stereo channels (1/8" trs), all with a 3 band eq (low shelf, high shelf, band), each channel is also going to have 1 stereo fx send. Then the whole thing is going to be output to a stereo TRS jack (maybe 1/8" just to keep it consistant with the inputs) and possible a R/L RCA pair. The headphone jack is just going to be a 1/8" trs as well.
>> I am currently looking into an internal video out mod for the DMG and I talked briefly with NeX about it.
Its going to be a tough one.
I have to get my hands on a FPGA board and try and replicate another persons project before I try and make something small enough to ram into the case, but all of that will hopefully come in due time.
I tried to read through the entire thread, but I didn't take notes about all the different ideas people had and kinda forgot/been too busy to really read through it, so if anyone has any questions or ideas, w/e just send me an email at email@example.com
Last edited by skybreaker (March 27, 2012 10:21 pm)