ChipMusic.org - 2 quick questions about the arduino boy

Re: 2 quick questions about the arduino boy

2013-03-29T16:54:01Z

No problem, good luck with your build. I think using batteries is better option anyway.

Re: 2 quick questions about the arduino boy

2013-03-29T15:59:13Z

I think I'll use batteries to power it since my cable doesn't have a pin in the 4 position. Thanks for the help kitsch and ashimoke.

Re: 2 quick questions about the arduino boy

2013-03-29T14:44:31Z

Das Hype Machine wrote:

According to the lsdj wiki http://littlesounddj.wikia.com/wiki/PC_ … _Interface the top middle pin is the serial in so I'm not sure if I can swap that pin.

Use pin 4 from this wiki page diagram for the swap. It's not needed.

Re: 2 quick questions about the arduino boy

2013-03-29T14:19:01Z

yes, it should be fully compatible with diecimila.

Re: 2 quick questions about the arduino boy

2013-03-29T14:16:03Z

According to the lsdj wiki http://littlesounddj.wikia.com/wiki/PC_ … _Interface the top middle pin is the serial in so I'm not sure if I can swap that pin.

Re: 2 quick questions about the arduino boy

2013-03-29T10:02:02Z

You have to keep the ground. The top center pin (looking at GB connector) should be available for swap afaik.

Not sure about diecimila but i guess it should work. Wait for someone to confirm this.

2 quick questions about the arduino boy

2013-03-29T02:12:31Z

I'm about to start building an arduinoboy and I'm wondering if the latest code is compatible with the arduino diecimila, its the only arduino I have. And if I modded the dmg 04 cable, switching the ground pin to the 5V pin, would the arduino boy not encounter a problem if there is no ground pin connecting it to the gameboy?