Yep, I'd also recommend a mixer. I tested heavily with a splitter on a pro-mod and my micro, and both ran at full volume, but soft songs will drop beats and such (That green LED tells you when the volume is too low). Honestly, running through a mixer gives you direct volume control, which allows you to tweak the visuals a bit on the fly.

I got a couple emails and I did get the parts in for the last set of these, so there are some available again.

Anyway finished the case today, works like a charm.
But i would suggest to put a mixer between, since the audio from a DMG itself might be to low on softer tunes.

Thanks everyone for helping me raise funds for the next synth project! I'll keep you posted when it comes to life.

email address?

Obviously I've not tested it, but it's known to work on old consoles.

Sadly PAL is not a trivial code change for video programmers. We literally have to time every line of pixels against a master frequency, and squeeze the rest of the program in between the lines. (that space is called a "VBLANK" in coding by-the-way!).

As the timing is different for NTSC, PAL and SECAM, that means a microsecond will destroy alignment, color or sometime not even show a picture at all.
Note the dents in my forehead next time you see me at a show.

or like maybe I can get hold of a projector or something that can deal with NTSC aswell. Video not really my specialty. Looks sick though, I was teetering on buying the original many times

Will this be limited run?

This kit is actually a modification of the MIDIo kit that converts midi to ANSI art characters. As it's a hardware mod, I won't sell the kit version, and I'm really just using it to raise money to develop the next kit.

So, the hardware will not be a limited run, but this particular modification and software combo will be less than 20 units total including customs. Obviously, anyone getting custom logos will have a unique version. I usually change-up the audio processing algorithms on those a bit to fit the artwork, and no artwork has been re-used.