Bear in mind that while force mode = 0x01, pressing the mode button won't do anything.

It's not *not* normal, but those aren't the default channels. Defaults are PU1 = MIDI channel 1, PU2 = MIDI channel 2, WAV = MIDI channel 3, NOI = MIDI channel 4.

However, the teensyboy firmware loads values for the output channels (and a bunch of other stuff) from EEPROM, so channel 16 etc. must be stored in EEPROM for some reason.

One fix would be to open Arduinoboy1_2_3_teensy.ino and edit:
  boolean alwaysUseDefaultSettings = false;
to read:
  boolean alwaysUseDefaultSettings = true;

Then recompile and upload to the Teensy.

That's assuming the default channels are what you want.

OK Thanks
Can you also confirm that I can force the midi out mode, at the same time, with:

    boolean alwaysUseDefaultSettings = true;

    0x01, //force mode
    0x05, //mode

?

However, the teensyboy firmware loads values for the output channels (and a bunch of other stuff) from EEPROM, so channel 16 etc. must be stored in EEPROM for some reason.

One fix would be to open Arduinoboy1_2_3_teensy.ino and edit:
  boolean alwaysUseDefaultSettings = false;
to read:
  boolean alwaysUseDefaultSettings = true;

Then recompile and upload to the Teensy.

That's assuming the default channels are what you want.

I set mine to "delayMicroseconds(1000)" anyways, since it doesn't seem to increase latency, so why not

In his thread we established that some of the MIDI code for the original Arduinoboy which interfaces with the Max patch is not present in the code for the USB Boy due to the Teensy code using Teensy libraries. It would require porting or rewriting a good bit of code. I'd be up to the task but not for at least a month. But all USB Boys are easy to upgrade firmware on. so there is room to roll out an update in the future

Ah okay. Sounds good. I'll get in touch with your about a future software update.

Hey, I ordered one of your USB Boys, and I'm trying to figure out how to get it working with Max and the ArduinoBoy patch it came with. I need to fix these dropped notes issues.  Any ideas?

Did you try all of the suggestions made in your thread? Max Dolensky is going to be more help than I will be in this sort of issue as it is not a hardware issue.

I made a couple USB Arduino Boys today. Mostly just because I had the stuff and I could:

Hey, I ordered one of your USB Boys, and I'm trying to figure out how to get it working with Max and the ArduinoBoy patch it came with. I need to fix these dropped notes issues.  Any ideas?

Does it default to a mode or do I need to specify that by editing the code?

Analog wrote:

Willing to try this, the little scale teensy sync works really weird on me, (or I'm just missing something anyways).

For this proyect, what files exactly and how I upload the software to the teensy?

thanks in advance.

ah, glad you got the package!  very cool, was starting to get worried

Thanks matt!, you got the payment ok, don't you? I'mm still worried !

Hey, gracias Ric. Pues ni idea donde comprar los componentes en DF, sí, se vé muy fácil. ¡gracias, te molestaré por facebook!

Willing to try this, the little scale teensy sync works really weird on me, (or I'm just missing something anyways).

For this proyect, what files exactly and how I upload the software to the teensy?

thanks in advance.

ah, glad you got the package!  very cool, was starting to get worried