2014-05-05T19:48:05Z PunBB https://chipmusic.org/forums/topic/14235/can-the-gameboy-pocket-be-modded-in-exactly-the-same-way-as-the-dmg/ It depends on what do you mean by exactly the same way? For the most part it's a yes. But you won't be able to put 6.5 audio jack, or 2 MIDI jacks. However with some PCB trimming and careful measuring a lot can be done. As for simple mod sets like line out + pitch + backlight there's no problem at all.

]]> https://chipmusic.org/friendofmegaman 2014-05-05T19:48:05Z https://chipmusic.org/forums/post/207820/#p207820 I've always found pockets pretty easy to backlight, the polarisation film comes off pretty easily, used to have to cut some of the plastic away on the inside to fit the backlight (which is easy enough) in but that might not be a problem with the newer backlights. Easy to prosound too from what I can remember, think you just have to de-soulder two little bits.

]]> https://chipmusic.org/Evil+Scientist 2014-05-05T15:24:20Z https://chipmusic.org/forums/post/207802/#p207802 There's less room in the case so not everything will fit,  besides that i'm pretty sure it's the same

]]> https://chipmusic.org/Dadibom 2014-05-05T13:04:25Z https://chipmusic.org/forums/post/207798/#p207798 Hey guys, ive just noticed recently that pockets are going for a fair bit cheaper than dmg's on eBay and I was just wondering whether they worked and could be modded exactly the same as the DMG? Thanks

]]> https://chipmusic.org/gr3yh4m3 2014-05-05T12:56:37Z https://chipmusic.org/forums/post/207797/#p207797