<![CDATA[ChipMusic.org - How to patch custom waveforms to mgb!!]]> 2014-07-01T01:38:39Z PunBB https://chipmusic.org/forums/topic/14655/how-to-patch-custom-waveforms-to-mgb/ <![CDATA[Re: How to patch custom waveforms to mgb!!]]> Wait so now I can transfer my LSDJ wubs and samples to mGB completely?

Dang.

]]> https://chipmusic.org/MaxDolensky 2014-07-01T01:38:39Z https://chipmusic.org/forums/post/212188/#p212188 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> I knew I should of encrypted that data. Doh! wink Though by the sounds of it the compiler kinda split things up a bit.

Nitro2k01 you know why the channels are hardcoded, if you can think of a better schema in asm for *quicky* jumping to the desired command, you of course could just modify the source. wink

]]> https://chipmusic.org/Trash80 2014-07-01T01:12:31Z https://chipmusic.org/forums/post/212187/#p212187 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> i still have them in my archive and had no issues with other gear.. my hunch is that it was midicc message specific the problems others had, as usually i ran it along side drum machines which need no midicc, though i had no crashes even using it in combo with the edirol v4 and korg kaptivator which were using midicc for mixer and effect controls. then again, i have a strange history of things working for me that don't work for others (i never needed to do anything special at all to make piggy spit midi out of my gp2x, just use the normal build as is and it worked for me)

]]> https://chipmusic.org/e.s.c. 2014-06-30T17:08:57Z https://chipmusic.org/forums/post/212151/#p212151 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> Indeed, it was a bit crash-prone when receiving MIDI on other channels than the ones assigned to that ROM version. If you only sent data on the right channels it wouldn't crash, but then again what would the point be of using the special channel version in that case?

I deleted those mGB versions from my archive because of that reason, but I'm hoping to work on my own MIDI client again at some point.

]]> https://chipmusic.org/nitro2k01 2014-06-30T17:02:58Z https://chipmusic.org/forums/post/212148/#p212148 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> i heard a lot of people had issues with the multi-channel versions (is that correct, nitro?).. i know ive always used the version that sets it to channels 11-15 with no issues

]]> https://chipmusic.org/e.s.c. 2014-06-30T15:02:43Z https://chipmusic.org/forums/post/212133/#p212133 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> nitro2k01 wrote:
egr wrote:

"First 32 digits of pi"

Bro, do you even hex?

http://www.wolframalpha.com/input/?i=pi+hexadecimal

3.243f6a88 85a308d3 13198a2e 03707344 a4093822299f31d0082efa98ec4e6..._16

Are you still thinking of making a version of mGB with selectable MIDI channels? This would be most handy I think!

]]> https://chipmusic.org/thursdaycustoms 2014-06-30T14:50:36Z https://chipmusic.org/forums/post/212131/#p212131 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> nitro2k01 wrote:

In other words, the actual data starts at address 3C9C and is spaced out so every 6th byte is waveform data.

THATS WHY I COULDN'T FIND THEM!!! *grumble*....

]]> https://chipmusic.org/Jazzmarazz 2014-06-30T12:01:20Z https://chipmusic.org/forums/post/212124/#p212124 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> nitro2k01 wrote:
egr wrote:

"First 32 digits of pi"

Bro, do you even hex?

http://www.wolframalpha.com/input/?i=pi+hexadecimal

3.243f6a88 85a308d3 13198a2e 03707344 a4093822299f31d0082efa98ec4e6..._16

touché

]]> https://chipmusic.org/egr 2014-06-30T08:25:43Z https://chipmusic.org/forums/post/212113/#p212113 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> egr wrote:

"First 32 digits of pi"

Bro, do you even hex?

http://www.wolframalpha.com/input/?i=pi+hexadecimal

3.243f6a88 85a308d3 13198a2e 03707344 a4093822299f31d0082efa98ec4e6..._16

]]> https://chipmusic.org/nitro2k01 2014-06-30T08:22:23Z https://chipmusic.org/forums/post/212112/#p212112 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> Here's a couple waveframes, also edited topic title and added info to first post.

"First 32 digits of pi"

"Shitty Saw"

]]> https://chipmusic.org/egr 2014-06-30T07:57:42Z https://chipmusic.org/forums/post/212110/#p212110 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> Well well well!! Nicely and clearly done, thank you! Now I just gotta start coming up with some more interesting waveforms.

]]> https://chipmusic.org/egr 2014-06-30T07:03:33Z https://chipmusic.org/forums/post/212109/#p212109 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> egr wrote:

EDIT:  this sounds like a nice little project for nitro wink

Does it really? Well fine then...

http://blog.gg8.se/wordpress/2014/06/30 … waveforms/

]]> https://chipmusic.org/nitro2k01 2014-06-30T06:52:01Z https://chipmusic.org/forums/post/212107/#p212107 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> e.s.c. wrote:

i linked him the thread, curious to see where this goes

Word.

]]> https://chipmusic.org/egr 2014-06-29T18:41:26Z https://chipmusic.org/forums/post/212072/#p212072 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> i linked him the thread, curious to see where this goes

]]> https://chipmusic.org/e.s.c. 2014-06-29T18:28:03Z https://chipmusic.org/forums/post/212070/#p212070 <![CDATA[Re: How to patch custom waveforms to mgb!!]]> Before you pull your hair out to much, I did notice on the arduinoboy page that "Current Source code available upon request. (Its a bit of a mess without comments. wink" so maybe we should see if we can get hold of trash80?

]]> https://chipmusic.org/egr 2014-06-29T17:49:07Z https://chipmusic.org/forums/post/212065/#p212065