<![CDATA[ChipMusic.org - Relocating DC converter board]]> 2014-07-14T04:25:28Z PunBB https://chipmusic.org/forums/topic/14752/relocating-dc-converter-board/ <![CDATA[Re: Relocating DC converter board]]> 30awg has worked for me before aswell.

]]> https://chipmusic.org/12ianma 2014-07-14T04:25:28Z https://chipmusic.org/forums/post/213122/#p213122 <![CDATA[Re: Relocating DC converter board]]> Thanks guys, I ended up going with some 26 Awg wire. I threw the old Final Fantasy Adventure cart in and gamed for 20 minutes and everything seems to be nice and cool on the inside.




messy but functional

]]> https://chipmusic.org/JOBO 2014-07-12T23:09:22Z https://chipmusic.org/forums/post/213072/#p213072 <![CDATA[Re: Relocating DC converter board]]> I once used 32 AWG and it didn't overheat and still doesn't. Typically though I'd use 28.

]]> https://chipmusic.org/friendofmegaman 2014-07-12T18:15:19Z https://chipmusic.org/forums/post/213069/#p213069 <![CDATA[Re: Relocating DC converter board]]> Too thin. Find an old IDE cable and cut it to length.

]]> https://chipmusic.org/Jazzmarazz 2014-07-12T11:58:03Z https://chipmusic.org/forums/post/213056/#p213056 <![CDATA[Relocating DC converter board]]> I am looking to relocate my DC converter board from left side to right side. Is there a preferred gauge of wire that works best? I'm afraid my electrical knowledge is limited and I'm a noob when it comes to modding... I don't want to run the risk of overheating the board. I had planned to use 30 awg wire, is this too thin? I've never done this before and I figured I should ask the professionals wink

(The most relevant thread for dc converter boards would not let me bump)

]]> https://chipmusic.org/JOBO 2014-07-12T09:13:43Z https://chipmusic.org/forums/post/213053/#p213053