<![CDATA[ChipMusic.org - Arduinoboy Midi Out Question]]> 2015-07-14T15:43:50Z PunBB https://chipmusic.org/forums/topic/16456/arduinoboy-midi-out-question/ <![CDATA[Re: Arduinoboy Midi Out Question]]> try reducing the delay settings using the maxpat editor that comes in the zip. You will need to instal the max runtime to use it.

]]> https://chipmusic.org/herr_prof 2015-07-14T15:43:50Z https://chipmusic.org/forums/post/232540/#p232540 <![CDATA[Re: Arduinoboy Midi Out Question]]> I have tried with the monotribe
I have set up a loop in LSDJ, with a gameboy kick and a N.
The N triggers a kick from the monotribe
I still have a noticeable latency...

]]> https://chipmusic.org/cyberic 2015-07-14T11:52:42Z https://chipmusic.org/forums/post/232530/#p232530 <![CDATA[Re: Arduinoboy Midi Out Question]]> jefftheworld wrote:

If you have any sort of synth with MIDI, try testing your arduinoboy directly with that to confirm or rule out your PC or software configuration.

OK I'll try it with my monotribe and let you know.

]]> https://chipmusic.org/cyberic 2015-05-14T10:04:47Z https://chipmusic.org/forums/post/230134/#p230134 <![CDATA[Re: Arduinoboy Midi Out Question]]> cyberic wrote:
jefftheworld wrote:

Shouldn't be any noticeable latency, no.

I will try to measure it...
I simply play a kick on the GB, which also sends a N04 note, which triggers a sample in ableton live
Does ot seem correct to you?

It sounds to me like the latency is coming from your PC. Either your software or audio interface is causing output latency or your MIDI interface is causing input latency.

My setup is optimized for sub-10ms latency, so I don't notice any issues. In fact, I predominantly use my arduinoboy with hardware synths, where there isn't a computer or software to cause latency, and can confirm that the arduinoboy performs brilliantly.

If you have any sort of synth with MIDI, try testing your arduinoboy directly with that to confirm or rule out your PC or software configuration.

]]> https://chipmusic.org/jefftheworld 2015-05-14T09:30:16Z https://chipmusic.org/forums/post/230133/#p230133 <![CDATA[Re: Arduinoboy Midi Out Question]]> jefftheworld wrote:

Shouldn't be any noticeable latency, no.

I will try to measure it...
I simply play a kick on the GB, which also sends a N04 note, which triggers a sample in ableton live
Does ot seem correct to you?

]]> https://chipmusic.org/cyberic 2015-05-14T08:12:57Z https://chipmusic.org/forums/post/230131/#p230131 <![CDATA[Re: Arduinoboy Midi Out Question]]> cyberic wrote:

I recently tried LSDJ midi out as well, and I seem to get a lot of latency.
I tried a nex arduinoboy, then a teensybox, with two different MIDI interfaces.
There really is a noticeable latency.
Is it expected?

Thx

Shouldn't be any noticeable latency, no.

]]> https://chipmusic.org/jefftheworld 2015-05-14T08:06:58Z https://chipmusic.org/forums/post/230129/#p230129 <![CDATA[Re: Arduinoboy Midi Out Question]]> herr_prof wrote:

and assign those to tap tempo

what would you have to send to tap tempo?

]]> https://chipmusic.org/cyberic 2015-05-14T08:01:55Z https://chipmusic.org/forums/post/230128/#p230128 <![CDATA[Re: Arduinoboy Midi Out Question]]> I recently tried LSDJ midi out as well, and I seem to get a lot of latency.
I tried a nex arduinoboy, then a teensybox, with two different MIDI interfaces.
There really is a noticeable latency.
Is it expected?

Thx

]]> https://chipmusic.org/cyberic 2015-05-14T07:59:52Z https://chipmusic.org/forums/post/230127/#p230127 <![CDATA[Re: Arduinoboy Midi Out Question]]> Trash80 explained to me that the dmg cpu couldnt handle both sync and midi out of the same device. Cant remember if the bottleneck was dmg serial, dmg cpu, arduino cpu or a combo of the above.

]]> https://chipmusic.org/herr_prof 2015-04-22T17:27:37Z https://chipmusic.org/forums/post/229215/#p229215 <![CDATA[Re: Arduinoboy Midi Out Question]]> If all you need is sync, you may be interested in Gijs' Master Clock Generator. I don't think you can buy or otherwise easily attain one, though.

http://gieskes.nl/master-clock-generator/

edit: Or, I guess, an Arduinoboy could be modified in hardware and software to do the same thing.

]]> https://chipmusic.org/nitro2k01 2015-04-22T17:12:28Z https://chipmusic.org/forums/post/229214/#p229214 <![CDATA[Re: Arduinoboy Midi Out Question]]> Or sacrifice one channel for tick sync.

]]> https://chipmusic.org/KeFF 2015-04-22T15:57:16Z https://chipmusic.org/forums/post/229208/#p229208 <![CDATA[Re: Arduinoboy Midi Out Question]]> Long answer: You need another device that can take a note or midi cc and assign those to tap tempo AND then send midi clock. So for example I would use the line6 m5, have a lsdj midi out channel send MIDI CC 64 value 127 and then slave all your slavable devices like the 2nd lsdj running aboy in clock slave to that.

]]> https://chipmusic.org/herr_prof 2015-04-22T15:38:13Z https://chipmusic.org/forums/post/229205/#p229205 <![CDATA[Re: Arduinoboy Midi Out Question]]> Nope.

]]> https://chipmusic.org/herr_prof 2015-04-22T15:34:40Z https://chipmusic.org/forums/post/229204/#p229204 <![CDATA[Re: Arduinoboy Midi Out Question]]> I think you need 2 arduinoboys for this, at least theorethically it should be possible. I'm not sure if anyone has tried it?

]]> https://chipmusic.org/KeFF 2015-04-22T15:12:41Z https://chipmusic.org/forums/post/229203/#p229203 <![CDATA[Arduinoboy Midi Out Question]]> I've gotten my aboy successfully set up to send midi out data via lsdj. My question is: Is there any way to sync 2 instances of lsdj while also sending midi out (in this instance to a drum machine). I attempted this last night and it resulted in the slave gameboy glitching out / freezing.

Thanks!

]]> https://chipmusic.org/TREYFREY 2015-04-22T15:01:47Z https://chipmusic.org/forums/post/229200/#p229200