<![CDATA[ChipMusic.org - Arduinoboy trouble]]> 2015-09-13T11:00:36Z PunBB https://chipmusic.org/forums/topic/16758/arduinoboy-trouble/ <![CDATA[Re: Arduinoboy trouble]]> Hello,

I don't know if i should make a new thread or reuse this one. I also have trouble making an arduinoboy. Actually, everything seems to work, but neither LSDJ nor mGB seem to receive data.
I've made a little video of my current setup:
https://www.youtube.com/watch?v=vxaYVNTi5wQ

]]> https://chipmusic.org/ThaNerd 2015-09-13T11:00:36Z https://chipmusic.org/forums/post/234520/#p234520 <![CDATA[Re: Arduinoboy trouble]]> I can't see a resistor on that schematic that goes from the button to ground... It is on the original one tho. You need one or else pin 5 will think it's still connected.

]]> https://chipmusic.org/Timbob 2015-06-26T10:04:14Z https://chipmusic.org/forums/post/231797/#p231797 <![CDATA[Re: Arduinoboy trouble]]> Use a multimeter and make sure nothing is bridging those pins/pads.

]]> https://chipmusic.org/jefftheworld 2015-06-25T19:04:03Z https://chipmusic.org/forums/post/231775/#p231775 <![CDATA[Re: Arduinoboy trouble]]> I builded the same arduinoboy kit, I just followed the video instructions and it worked https://www.youtube.com/watch?v=13adGnZoC9E Sorry for my bad English

]]> https://chipmusic.org/maniacfreakquency 2015-06-25T17:59:59Z https://chipmusic.org/forums/post/231772/#p231772 <![CDATA[Re: Arduinoboy trouble]]> No, resistor between 4.7k and 10k not help!(

]]> https://chipmusic.org/stress_tn 2015-06-24T19:55:20Z https://chipmusic.org/forums/post/231747/#p231747 <![CDATA[Re: Arduinoboy trouble]]> stress_tn wrote:

My switch is NO. I mean that buton not soldered, I pull out it, and there are no contact between PB1 and PB2.
10k to the 4.7k place? strange but I'll try.

No, use a resistor between 4.7k and 10k instead of the 2k ohm resistor.

]]> https://chipmusic.org/Jazzmarazz 2015-06-23T14:02:59Z https://chipmusic.org/forums/post/231695/#p231695 <![CDATA[Re: Arduinoboy trouble]]> My switch is NO. I mean that buton not soldered, I pull out it, and there are no contact between PB1 and PB2.
10k to the 4.7k place? strange but I'll try.

]]> https://chipmusic.org/stress_tn 2015-06-23T06:12:04Z https://chipmusic.org/forums/post/231684/#p231684 <![CDATA[Re: Arduinoboy trouble]]> Try a 4.7k to 10k resistor.

]]> https://chipmusic.org/Jazzmarazz 2015-06-22T23:38:57Z https://chipmusic.org/forums/post/231672/#p231672 <![CDATA[Re: Arduinoboy trouble]]> Is your switch NC or NO?

]]> https://chipmusic.org/jefftheworld 2015-06-22T23:16:56Z https://chipmusic.org/forums/post/231671/#p231671 <![CDATA[Arduinoboy trouble]]> Hello friends. I have trouble with my arduinoboy. I soldered 1 piece and when I turn it on it always change mode. Leds changed and I don't understand what is going on. I solder this kit https://www.dropbox.com/s/gjk89h42zmusw … s.pdf?dl=0
Button contacts not connected I checked. May be something soldered togeather, but don't understand what.
And one strange thing: I cheked 2 k'ohm resitor (button resistor), when it soldered in the device tester show 1.06 k.om

]]> https://chipmusic.org/stress_tn 2015-06-22T22:38:22Z https://chipmusic.org/forums/post/231669/#p231669