Doesn't compile with Teensy 2.0
I've ordered a few of these after I've seen Teensyboy port by NoizeInABox... sure I also have 2 3.2 and 2 LC, but that's kind of a pain :-/
I'll try to see if I can fix the compile errors, and will send information somewhere (probably on GitHub?), but as I suck, I'll probably give up before everything's fixed...
He didn't add support for the Teensy 2.0, so it is not officially supported. Only the noiseinabox port works on the 2.0. :<
]]> I've ordered a few of these after I've seen Teensyboy port by NoizeInABox... sure I also have 2 3.2 and 2 LC, but that's kind of a pain :-/I'll try to see if I can fix the compile errors, and will send information somewhere (probably on GitHub?), but as I suck, I'll probably give up before everything's fixed...
]]>Is the LLS mandatory?
Yes.
]]>8-BrickDMG wrote:Sorry to bump this. Has anyone tried this with the Teensy LC?
I've been getting this error when compiling.
Error: lo register required -- `sub ip,#1'
I wanted to try it out since I had a Teensy LC on hand, but I got the error as well. This would be great for cutting cost, size, and parts down quite a bit, though. All you really need is a link cable and the mcu.
Tempted to pick up a 3.2, but it'd be great to see it working on the LC!
Edit: I have a curse where I post on a forum about a problem and fix it myself within 5 minutes. It's convenient but makes me look like an idiot
It compiled fine using 48MHz (optimized) for CPU speed. Make sure you set your USB Type as MIDI as well!
edit edit: logic level shifter too
Trash80 put out a fix today (thanks btw!)
Is the LLS mandatory?
]]>Sorry to bump this. Has anyone tried this with the Teensy LC?
I've been getting this error when compiling.
Error: lo register required -- `sub ip,#1'
I wanted to try it out since I had a Teensy LC on hand, but I got the error as well. This would be great for cutting cost, size, and parts down quite a bit, though. All you really need is a link cable and the mcu.
Tempted to pick up a 3.2, but it'd be great to see it working on the LC!
Edit: I have a curse where I post on a forum about a problem and fix it myself within 5 minutes. It's convenient but makes me look like an idiot 
It compiled fine using 48MHz (optimized) for CPU speed. Make sure you set your USB Type as MIDI as well!
edit edit: logic level shifter too
]]>I've been getting this error when compiling.
Error: lo register required -- `sub ip,#1'
]]>i am a noob, does anyone know if it's possible to update the arduinoboy from thursdaycustoms?
on mine you have the unsoldered pins you can hook a FTDI cable up to. Fwiw you dont need to update the code to use the same old modes.
]]>
]]>thanks
]]>Anyone else having trouble connection to the editor? It seems to send info, but never really "connects' and doesnt load the current setting. I have to enter all the channels, cc #'s etc each time ....always displays default. using a Mac and MOTU ultralite MK3 interface. previous versions worked perfectly.
]]>I think I found a hardware fix and I'm waiting on it to arrive, but it would be nice to just use arduino boy.
]]>