<![CDATA[ChipMusic.org - Drag N Derp not working]]> 2016-08-19T00:14:34Z PunBB https://chipmusic.org/forums/topic/18916/drag-n-derp-not-working/ <![CDATA[Re: Drag N Derp not working]]> This is exactly what happened with mine when I first got it, and it was just the contacts - inserting a piece of card like you said you tried fixed it for me, although you did say thin paper, rather than card, maybe it's just not lifting enough. Try doubling it up if you're using paper. Also with mine the card wraps further around the back of the cartridge. I don't know if doing that helped at all, but mine does work fine, so maybe it's worth a try. I may post a picture of it tomorrow to show exactly how I mean.

]]> https://chipmusic.org/HillyOTM 2016-08-19T00:14:34Z https://chipmusic.org/forums/post/247248/#p247248 <![CDATA[Re: Drag N Derp not working]]> I'll just throw this here. The way I typically clean contacts within a console itself is to find a piece of cardboard, cut it to the same size as a cart circuit board and wet it with Isopropyl. Then I insert and remove it several times.

]]> https://chipmusic.org/Jazzmarazz 2016-08-17T20:36:02Z https://chipmusic.org/forums/post/247197/#p247197 <![CDATA[Re: Drag N Derp not working]]> ive tried all your suggestions, i even emailed the professor and he suggested a thin piece of paper to get the contacts to lift closer to the gameboy contacts. but i have had no luck, im going to return it and order another one if there are any available

thank you for your suggestions much appreciated

]]> https://chipmusic.org/BryDesu 2016-08-17T20:16:55Z https://chipmusic.org/forums/post/247196/#p247196 <![CDATA[Re: Drag N Derp not working]]> that too!

]]> https://chipmusic.org/herr_prof 2016-08-17T14:32:40Z https://chipmusic.org/forums/post/247183/#p247183 <![CDATA[Re: Drag N Derp not working]]> Both of you are probably wrong. If it was a USB cable problem, the cart wouldn't detect at all in the computer. It wouldn't randomly give glitched Nintendo graphics.

Probably, the cartridge contacts are dirty, or misaligned. Open up the cart and clean the edge connector with isopropyl alcohol.

]]> https://chipmusic.org/nitro2k01 2016-08-17T14:25:53Z https://chipmusic.org/forums/post/247182/#p247182 <![CDATA[Re: Drag N Derp not working]]> Make sure your Micro USB cable is one that can transfer DATA and is not only just a charging cable.

]]> https://chipmusic.org/katsumbhong 2016-08-17T13:23:49Z https://chipmusic.org/forums/post/247181/#p247181 <![CDATA[Re: Drag N Derp not working]]> Try updating the firmware. Dunno why but that helped me.

]]> https://chipmusic.org/herr_prof 2016-08-17T12:30:23Z https://chipmusic.org/forums/post/247178/#p247178 <![CDATA[Drag N Derp not working]]> Hey guys i got my Drag N Derp yesterday

ive been trying to add a ROM to it but no matter what ROM i add it doesn't boot up correctly.
a distorted Nintendo sign rolls down and that is all i get.

Does anyone know what could be happening  thank you

]]> https://chipmusic.org/BryDesu 2016-08-17T04:30:35Z https://chipmusic.org/forums/post/247165/#p247165