ChipMusic.org - Sync Help: Nanoloop Mono and Nanoloop 2.8

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-14T01:40:06Z

I used nova drone and maximal drone for the drones (obviously), nanoloop mono, microtonic/PO32 for the kick, and bastl kastle added some chaos near the end.

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T21:44:29Z

It's quite cool! What did you use for the kick ?

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T18:48:36Z

Thanks I already am! I plan on recording something with this setup soon, but here's something I recorded recently with some analog drone synths and nanoloop mono: https://soundcloud.com/phenepsylamine/d … 19/s-seuCP

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T16:27:16Z

I'm happy that it helps. Have fun with your setup.

Nanoloop mono is my favorite nanoloop version, I hope you enjoy it!
(i would be really happy to listen to the music you make with nanoloop, so don't hesitate to share)

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T15:13:38Z

Actually that was the solution! the link cable had a wire connecting pin 4 so all I had to do was cut it and now it works great! thanks Gala!

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T15:01:08Z

Thanks for the link. I noticed that the d-pad works on the DMG running mono until I start nanoloop 2.8 on the GBA. Also the dpad isnt completely disabled as I am able to edit a note with only the right button on the dpad. But I can't use any of the other directions. Everything else seems to work fine on mono and I have no issues with 2.8. The link cable also adjusts the contrast on the DMG when I plug it in and the GBA powers on when I connect to two. Not sure if this is normal or not.

Re: Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T14:24:59Z

Someone here has a similar problem : https://chipmusic.org/forums/topic/2427 … k-problem/

pancakehero wrote:

when I plug in the link cable in both dmg's the d-pad stops working on one of the gameboys.

You could try the solution Orgia Mode gave.

Sync Help: Nanoloop Mono and Nanoloop 2.8

2019-04-13T14:18:09Z

I bought a cheap DMG to GBC link cable on ebay to sync nanoloop 2.8 with nanoloop mono. I can get the tempo to sync but the main issue I'm having is that I'm unable to use the d-pad on my DMG when they are connected. It works fine when I unplug the cable, and when I turn off the GBA. I'm not sure if the problem is the cable, Nanoloop mono, 2.8, or operator error. Any advice is greatly appreciated!