Grayboy wrote:These old systems gotta be updated more often!
Old systems? It's a product released in the last year on a modern OS. WTF are you on about?
Also, in the interest of not having someone else struggle through this perhaps you could post the PDF you mentioned so people can see the solution next time.
I posted the link to the pdf the same time you posted this.
and I meant that the OS should have come out earlier,
sorry if there was a bit of seeming "stupidity" in my words.
Whatever.
i'm sure it will help tons, thanks!
]]>These old systems gotta be updated more often!
Old systems? It's a product released in the last year on a modern OS. WTF are you on about?
Also, in the interest of not having someone else struggle through this perhaps you could post the PDF you mentioned so people can see the solution next time.
I had to open device page, fix the "unknown device" and install the drivers from there.
Wtf? That wasn't mentioned for win 7 users anywhere else. This was so damn complicated.
I didn't think this was going to be this hard. I used the 32mb SC when I had XP way back when.
These old systems gotta be updated more often! 
Maybe go to the offical EMS support forums? http://hkems.proboards.com/
]]>This is what I did:
-opened the "dseo" exe and set on test settings.
-routed the files in the address bar
-restarted my computer
-opened the GB USB and nothing changed
This restarting thing takes forever and is kind of slowing my night down.
Am I doing anything wrong? Or is it just my laptop, one of the few that probably just
don't work with this system?
for 64bit operating systems here is the driver download link. you will also need this program to install the 64bit drivers.
Did you use the aforementioned program to install said drivers or did you just skip that part without reading anything and install the drivers balls out?
windows 7 requires that the files have digital signatures, so the way
around this is to use the additional software (downloadable above) and put
the OS in to 'test mode', which is what developers use to try new drivers
without having to have them registered (and whatnot) for the signature to
be accepted. with the OS in test mode, you use the same software to sign
whatever files you need. restart your computer, and while still in test
mode, your software should work fine. this is the workaround to use the
software with windows 7, since the driver isn't digitally signed. that's
the general answer. if you are still having problems, e-mail us and we
will address your particular concerns that way, but the answer above is the
general issue people have with windows 7.
www.hkems.com/files/EMSlink/64bit_Driver_Installation_Guide.pdf
]]>