<![CDATA[ChipMusic.org - GBA clear sound mod...]]> 2011-12-28T03:44:40Z PunBB https://chipmusic.org/forums/topic/5683/gba-clear-sound-mod/ <![CDATA[Re: GBA clear sound mod...]]> *pot

]]> https://chipmusic.org/Pugbath 2011-12-28T03:44:40Z https://chipmusic.org/forums/post/85283/#p85283 <![CDATA[Re: GBA clear sound mod...]]> My mistake, you are correct. I just uploaded a photo of the points described on my tumblr... They're pretty small, and I used the front side under the speaker. For volume control, you'd need a second stereo trim pot, or if you aren't planning on using headphones, you could desolder the existing pots and rewire it with your new points straight to the existing output.

]]> https://chipmusic.org/Pugbath 2011-12-28T03:43:43Z https://chipmusic.org/forums/post/85282/#p85282 <![CDATA[Re: GBA clear sound mod...]]> Pugbath wrote:

Correct me if I'm wrong, but Gba should be the same as the dmg, right?

Nope. The amp is pre-pot. So if you solder to the pot you still have the amp messing everything up.
If you look up from the pot/jack area you will see 2 copper pads. Follow those traces back until you see 2 smd resistors.
Remove the resistors or just solder to the side closest to the CPU.
Sorry this is very badly detailed but I don't have an AGB in front of me right now.
Hope it helps!

P.S. No volume control.

]]> https://chipmusic.org/thursdaycustoms 2011-12-27T22:49:54Z https://chipmusic.org/forums/post/85262/#p85262 <![CDATA[Re: GBA clear sound mod...]]> Correct me if I'm wrong, but Gba should be the same as the dmg, right?

]]> https://chipmusic.org/Pugbath 2011-12-27T03:07:28Z https://chipmusic.org/forums/post/85205/#p85205 <![CDATA[Re: GBA clear sound mod...]]> Thank You!!!

]]> https://chipmusic.org/Tinctu 2011-12-25T21:33:28Z https://chipmusic.org/forums/post/85112/#p85112 <![CDATA[Re: GBA clear sound mod...]]> GBA... please!

]]> https://chipmusic.org/Tinctu 2011-12-25T21:33:02Z https://chipmusic.org/forums/post/85111/#p85111 <![CDATA[Re: GBA clear sound mod...]]> Ok, I made a tumblr page to upload this image on my phone, so I can't link it but it should be under pugbath.tumblr.com. Basically, find the volume slider and the top points are your left/right outputs and use the case/side solder point as your ground.

]]> https://chipmusic.org/Pugbath 2011-12-24T08:19:36Z https://chipmusic.org/forums/post/85022/#p85022 <![CDATA[Re: GBA clear sound mod...]]> gba sp please!

would appreciate that very much!

]]> https://chipmusic.org/bclikesyou 2011-12-24T04:12:07Z https://chipmusic.org/forums/post/85012/#p85012 <![CDATA[Re: GBA clear sound mod...]]> Gba or Gba sp? You can pro sound both, let me know which one and I'll post pictures for you.

]]> https://chipmusic.org/Pugbath 2011-12-24T03:18:11Z https://chipmusic.org/forums/post/85009/#p85009 <![CDATA[GBA clear sound mod...]]> I want to mod my GBAs with clear sound... Is there any Pro-Sound mod or PCB for GBA?

]]> https://chipmusic.org/Tinctu 2011-12-23T13:03:51Z https://chipmusic.org/forums/post/84950/#p84950