balloonbear wrote:

This card is broken. I bought new battery but it still not work. and can't save anything + now it can't connect with my PC

If the battery doesn't fix it, it may be defective. Do you have a screwdriver? Open it up and take a look to see if all of the components are soldered on correctly. I fixed my cart with a single solder blob since one component wasn't touching all of the solder pads.

I don't have such a small soldering-iron so i can't try to fix bad solder components. But I ALREADY HAVE CHANGED THE BATTERY! Still have same shit + don't work with PC no more. sad.
I don't know what to do to maky someone make technical support about it

nonfinite wrote:

That sounds exactly like an empty page.  Logo looks like ninte---, right?  WIth the lower half of the third "n" still visible, I think?

This card is broken. I bought new battery but it still not work. and can't save anything + now it can't connect with my PC

If the battery doesn't fix it, it may be defective. Do you have a screwdriver? Open it up and take a look to see if all of the components are soldered on correctly. I fixed my cart with a single solder blob since one component wasn't touching all of the solder pads.

i remember fixing a similar problem by placing the LSDJ rom on both pages

Now card don't connet to my PC. And I can't save anything

balloonbear wrote:

Also, i read how to swich pages. When i swich to another page (LED on the card lights) i have glitches on nintendo logo and it does't works. WHATTA HELL!

That sounds exactly like an empty page.  Logo looks like ninte---, right?  WIth the lower half of the third "n" still visible, I think?

This card is broken. I bought new battery but it still not work. and can't save anything + now it can't connect with my PC

Also, i read how to swich pages. When i swich to another page (LED on the card lights) i have glitches on nintendo logo and it does't works. WHATTA HELL!

That sounds exactly like an empty page.  Logo looks like ninte---, right?  WIth the lower half of the third "n" still visible, I think?

If LSDj boots and doesn't detect SRAM on the cartridge, the most likely culprit is a dead or disconnected battery. Batteries aren't perfect technology, stuff happens to them even when they are new sometimes. :-/

If you have any kind of information in SRAM currently that you want to save, back it up before you do any of this the following. Now take the cart apart and make sure that the battery is firmly seated in the battery clip, and try it again. If the battery is new, it might have just unseated from the battery socket—wiping your SRAM in the process.

As for the other stuff:

1.) I'm not sure what you are describing as the problem with the other page, exactly.

2.) If you are having problems with only one "page" on the EMS GB USB 64M, just reformat and flash that page. I've had a cart that was only in use for about a month get the ROM corrupted somehow (I think I was trying to run software that crashed the game boy), and I just reflashed it and it was fine.

The "Pages" functionality is kind of confusing at first, but once you get used to it, it's pretty cool.

Also, this isn't a nonfinite issue, for the record. These are the same carts everyone can get now, and they have some pretty well documented reliability issues. You'd be at risk for having the same problems no matter where you got it.

EDIT: A Tip for Pages

If you're worried about accidentally overwriting your SRAM on the GB USB 64M, I'd recommend only keeping programs that do not access SRAM on Page 2—things like MuddyGB, GB Electric Drum, Pounder, UCBN, and whatever else you'd like.

There was a decent thread about this subject a while back.

Maybe I was a little bit wrong. Maybe there's a lot of new for me. I just want to get used to it

If you have any kind of information in SRAM currently that you want to save, back it up before you do any of this the following. Now take the cart apart and make sure that the battery is firmly seated in the battery clip, and try it again. If the battery is new, it might have just unseated from the battery socket—wiping your SRAM in the process.

As for the other stuff:

1.) I'm not sure what you are describing as the problem with the other page, exactly.

2.) If you are having problems with only one "page" on the EMS GB USB 64M, just reformat and flash that page. I've had a cart that was only in use for about a month get the ROM corrupted somehow (I think I was trying to run software that crashed the game boy), and I just reflashed it and it was fine.

The "Pages" functionality is kind of confusing at first, but once you get used to it, it's pretty cool.

Also, this isn't a nonfinite issue, for the record. These are the same carts everyone can get now, and they have some pretty well documented reliability issues. You'd be at risk for having the same problems no matter where you got it.

EDIT: A Tip for Pages

If you're worried about accidentally overwriting your SRAM on the GB USB 64M, I'd recommend only keeping programs that do not access SRAM on Page 2—things like MuddyGB, GB Electric Drum, Pounder, UCBN, and whatever else you'd like.

There was a decent thread about this subject a while back.

look, if you turned on your gameboy then turned it off realy fast then back on, that means that you switched pages on your cart.... your sav may have been deleted.

I don't understand how it works, if it's possible. cos befor this card i have only smart card with 32 mb (backup only with transfer)