ChipMusic.org - DMG running on 3.7v

Re: DMG running on 3.7v

2012-10-17T14:39:39Z

8-BrickDMG wrote:

I found the answer online after searching around. I'll just leave the link here.
http://blog.gg8.se/wordpress/2009/07/22 … ge-ranges/

thats a great link to be able to reference, thanks!

Re: DMG running on 3.7v

2012-10-17T14:25:59Z

I found the answer online after searching around. I'll just leave the link here.
http://blog.gg8.se/wordpress/2009/07/22 … ge-ranges/

Re: DMG running on 3.7v

2012-10-13T21:29:04Z

Hmmm oh okay then, just to be safe I'll just have one running then.

Re: DMG running on 3.7v

2012-10-13T15:51:48Z

They may still come out of balance

Re: DMG running on 3.7v

2012-10-13T14:38:24Z

I wired them in parallel to make it 2000mAh. They were both fully charged before I added them though.

Re: DMG running on 3.7v

2012-10-13T14:13:09Z

Did you wire them in series? or parallel? you don't really want to charge l-ion batts and not balance charge cells. like if they are wired in parallel they could come out of balance very easy. Same goes for series

DMG running on 3.7v

2012-10-13T13:36:09Z

Hello everyone, I just had a quick question about the DMG's power draw.

Does it really matter if it is running below 6v or in my case running from 3.7v?

I added 2x rechargeable 3.7v 1000mAh lithium ion batteries into my DMG with a charging circuit
wired to the stock dc jack for charging and everything runs fine. The only difference I've noticed is the brightness
of the backlight which is just a bit darker.

Thanks.