if someone knows a solution to the issue i encountered - inconsistency in alignment between printers - or just has a lot of exposure with template making for a widely used software (word, etc), i'd be up for sending a sheet to you if you'll send back said template!

I know how to do this sort of thing, I'll look into it and get in touch when I have something to show.

kitsch wrote:

i have made several templates.

the issue i found was that even printing on the different printers i had access to, using a template didn't assure the same alignment.

then again, i'm not sure how to go about making a template that adapts to printer settings.  the most I was doing was aligning the pictures according to measurements, which printed inconsistently.

i can post a picture showing the layout of the stickers, they're symmetrical and maybe someone with more word processor knowledge can make something.  would that help if i posted a dimensional drawing showing how the sheet is split?  its 8 sections, basically...

if someone knows a solution to the issue i encountered - inconsistency in alignment between printers - or just has a lot of exposure with template making for a widely used software (word, etc), i'd be up for sending a sheet to you if you'll send back said template!

I think i may know someone to ask about this. I'll see what they say, and send you a PM if they have suggestions or are willing to help.

that'd be awesome!

i didn't pay enough attention in word processing or something...  it should be so simple too.

i have made several templates.

the issue i found was that even printing on the different printers i had access to, using a template didn't assure the same alignment.

then again, i'm not sure how to go about making a template that adapts to printer settings.  the most I was doing was aligning the pictures according to measurements, which printed inconsistently.

i can post a picture showing the layout of the stickers, they're symmetrical and maybe someone with more word processor knowledge can make something.  would that help if i posted a dimensional drawing showing how the sheet is split?  its 8 sections, basically...

if someone knows a solution to the issue i encountered - inconsistency in alignment between printers - or just has a lot of exposure with template making for a widely used software (word, etc), i'd be up for sending a sheet to you if you'll send back said template!

I think i may know someone to ask about this. I'll see what they say, and send you a PM if they have suggestions or are willing to help.

the issue i found was that even printing on the different printers i had access to, using a template didn't assure the same alignment.

then again, i'm not sure how to go about making a template that adapts to printer settings.  the most I was doing was aligning the pictures according to measurements, which printed inconsistently.

i can post a picture showing the layout of the stickers, they're symmetrical and maybe someone with more word processor knowledge can make something.  would that help if i posted a dimensional drawing showing how the sheet is split?  its 8 sections, basically...

if someone knows a solution to the issue i encountered - inconsistency in alignment between printers - or just has a lot of exposure with template making for a widely used software (word, etc), i'd be up for sending a sheet to you if you'll send back said template!

you'd see them a little, although through the clear screen protector as long as there isn't a gap i don't think it'd be a problem at all.  the issue if you took this approach would be to make sure the shape didn't come up in multiple parts because the precut places.  or else place it on the gameboy really carefully so it aligns right and you don't get gaps.

thats why there are 8 on the sheet though, you can mess up a bit and not worry too much.  they are also symmetrically placed if you want to attempt a printing template.

but, if you are using the sheet for a screen cover design, the pre-cut shapes are exactly that shape, so why would you need to cut it out when you can just peel it off?

sorry, i don't understand what you mean really...

are you familiar with the Avery brand of printable labels/stickers?  you can get return address labels, rounds labels, all sorts of things.  these are the same concept as that, except the shape is for where the graphics on a screen cover would normally be.  there is a precut LED hole and rectangular part where the LCD screen is seen.

Yea but if I just printed it and cut it out it would still have the outline of the precut shapes on it right.

So are you saying you just want a huge blank uncut sheet of sticker?