Oh no... now I'm wondering wether to get this one and detune my LSDJ accordingly or get the easy_clk and keep software as it is... xD

also probably of interest

http://store.kitsch-bent.com/product/3_clk

need to wrap up docs (and get the infamous hook-up wire)

@kitsch I'm the funny guy who has written you a mail asking for that a moment ago xD
I suppose the hookup wire won't take long to arrive, so I'd rather wait until you've got them full. Also I wanted to talk with you about adding some extra wire in my order (for the switch). We can discuss that through PM, if you like.

Using a 2.0 and a 4.0 requires too much extra work. I'll stick to the 4.19xxxx and the 2.xxxxx...  That's much easier.

If you want to switch between two crystals, one of them will be off if you use the original one. I'd rather recommend using a 2.000 MHz and a 4.000 MHz crystal to switch between, so you still get the octave range between the two crystals. Now you need to modify the frequency table, but the same modification will be valid for both the crystals.

I'll wait a little more to save up for bigger order but DogTag might be interested.

i have the PCBs assembled.  oddly the only remaining part for the kit is the hookup wire,

if you've got wire, i'm good to go.  if so, just PM me and i'll drop the price on a kit a little bit for ya

Oh, I see that now. My bad.

edit: is there more specific time then 'soon' for the easy_CLK Kitsch?

but the problem with doing the mod 100% in software is that you're limited to the lower end of the freuqency range of the hardware running at that particular clockspeed

Ah ok, I misunderstood what you said : P

you can indeed switch during gameplay, thats right

I guess it is possible to use similar trick to "half clock" LSDJ in software. Has this been done? I'd be interested...

It crashes if you switch it while it's on.  I don't plan to do that.  I've installed half clocks with a switch before and sold them with no complaints. With the kitsch kit, I believe you can switch it while playing a song but I'm not sure. That would be convenient but for me, it's not required.

Watch out, ashimoke pointed that if you do it that way the GB will crash.

Guess I should have read everything.  You can still install a half clock switch without the kitsch kit. Just takes more space. I want that kit too but he is out so I'm doing it the old school way.