As far i did everything manually.
I rightclicked on the .inf and tried to install it and i went to device manager>unknown device and navigated to the ems folder but no driver was found .
I'm thinking about getting a shitty old pc with windows xp on it (or would a virtual machine do it?)
Thanks

are you doing auto-install or letting the computer search for the files/folders itself?

if so, that's the issue.  you've got to do an entirely manual install with this.  meaning, you direct it to the files.  don't let it look at all or do anything auto

Same here.
Before i reinstalled Windows 7 Ult 64bit everything worked fine, but now i can't install the drivers anymore and I tried almost everything e.g The .sys and .inf on the CD, downloaded from the website, installed in actual Test mode (f8 at startup), I've fully disabled the UAC. When I try to install the .inf it says that the Installation Method is not supported by the inf-file.

Thank

alright. now i see what i was doing wrong. it did keep saying that there was no program to run the driver. I'll try it later tonight. Thanks, Kitsch. helpful as always.

you've got to install the drivers too,

there is an instructional document either on the minidisc, or in your download.  i think you're missing the instructions maybe, because they're step-by-step essentially

if you went straight to running the program, you left out the whole 'installation' part (i.e., a .sys and .inf file are missing on your comp)

nope. still not working.

alright, thanks, guys. So what I do now is put in the CD, run the program, and connect the EMS cart, right?

if you cant seem to remove test mode try placing this in the command prompt (make sure to run as admin)

bcdedit.exe -set TESTSIGNING OFF

should take you out after a reboot.

i can never ever get this to work for some reason haha
i've just left my os in test mode non stop anyway

that's because the OS is in test mode.  this displays in the corner as long as its still in test mode.

when you take it out of test mode, it goes away.

this 'test mode' of which i speak is an entirely different aspect from the EMS stuff altogether.

in short, microsoft made a security change in win7 which made running third-party, unsigned drivers somewhat tedious.  because microsoft requires the drivers to be registered with them for them to have this 'signed' status, developers and people who simply don't want to go through microsoft find workarounds.

the simplest thing to do is just forget the whole DSEO software part entirely.  hold f8 at start-up, this will put the computer into test mode.  and it will say this in the corner as long as its in test mode.

i'm assuming putting it back into normal mode involves holding f8 again, but if not the DSEO software will do this for you too

THEN comes the EMS part.  you'll still need to use the DSEO software to 'sign' them. 

hope that helps a little

Here's how to get rid of the words as a last resort:
http://www.sevenforums.com/tutorials/21 … sktop.html

It hasn't gone away and still hasn't recognized the driver.

haha, i have my old desk top running in my basement.

so this annoying little thing is due to the ems disk?

EMS sucks on windows 7.
If you can, get a hold of windows xp, it works like a charm on old stuff.