<![CDATA[ChipMusic.org - Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/topic/11882/help-with-spritesmods-gbamidi-cable-avr/ Thu, 24 Nov 2016 18:18:55 +0000 PunBB <![CDATA[Re: Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/post/249502/#p249502 capsulebat says:

Thank you!

]]> Thu, 24 Nov 2016 18:18:55 +0000 https://chipmusic.org/forums/post/249502/#p249502 <![CDATA[Re: Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/post/180422/#p180422 TylerBarnes says:

Here is my pcb layout if interested.

I'll record a video in a couple days or so.

]]> Mon, 12 Aug 2013 21:21:14 +0000 https://chipmusic.org/forums/post/180422/#p180422 <![CDATA[Re: Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/post/180412/#p180412 BLEO says:

Hells yes! I totally forgot about this one as well! Even bought a GBA with the intention of building one of these. I'll def take a DIY board.

]]> Mon, 12 Aug 2013 18:11:32 +0000 https://chipmusic.org/forums/post/180412/#p180412 <![CDATA[Re: Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/post/180398/#p180398 Jazzmarazz says:

I had forgotten about that project, its till in my bookmarks. Glad to hear you got it working though.
I plan on brewing up a few DIY boards for people to build into their hardware library.

All it would take is a a pretty simple modification to my ArduinoBoy board which will be printed soon too. Make some videos now that you have it. Too few people actually know about that tool.

]]> Mon, 12 Aug 2013 15:28:33 +0000 https://chipmusic.org/forums/post/180398/#p180398 <![CDATA[Re: Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/post/180397/#p180397 TylerBarnes says:

So I ended up figuring it out. I had a bad cable. I ripped up another one and now things are working. The above code is correct. and sending the firmware update through SysEx Librarian worked like a charm.

]]> Mon, 12 Aug 2013 15:05:13 +0000 https://chipmusic.org/forums/post/180397/#p180397 <![CDATA[Help with Spritesmods' GBAMIDI cable avr]]> https://chipmusic.org/forums/post/180031/#p180031 TylerBarnes says:

Has anyone had success with building one of these? More specifically flashing the AVR? http://spritesmods.com/?art=gbamidi

I have a programmer and have been trying to get it to work with no luck. His readme text says to use the makefile, but I'm getting errors when I try that. prolly cause I'm not using WinAVR like he is (I'm using mac).  I've been just using avrdude to set the fuses and upload the .hex file provided. I still can't get any mutiboot response out of it though.  I'm actually a beginner, so I don't know anything past what I've been able to piece together from tutorials/forums/help texts. If anyone with actual knowledge and experience with this could tell me if I'm doing things right/wrong I would be very grateful. Here's what I've been executing.  

 $ avrdude -c usbtiny -p m168 -u -U flash:w:gbamidi.hex -U lock:w:0x2f:m -U hfuse:w:0xdF:m -U lfuse:w:0xFf:m -U efuse:w:0x00:m

I found those fuse bit values inside his makefile.

One thing that struck me as odd is that when I use terminal mode in avrdude and 'dump flash 0 16800' the lines 0000 all the way through 3800 are all 'ff', which if I'm not mistaken, that means blank. Though it might have something to do with something else I saw in the makefile. near the top under where he declares the MCU, it says 'BOOTLOADER_ADDRESS=0x3800'. Like I said I'm a beginner so I don't know much about any of this stuff. All I wanted was a MIDIboy Advance sad

]]> Fri, 09 Aug 2013 09:37:54 +0000 https://chipmusic.org/forums/post/180031/#p180031