<![CDATA[ChipMusic.org - Flashing an EMS Smartcart 64m]]> https://chipmusic.org/forums/topic/13052/flashing-an-ems-smartcart-64m/ Fri, 27 Dec 2013 09:14:44 +0000 PunBB <![CDATA[Re: Flashing an EMS Smartcart 64m]]> https://chipmusic.org/forums/post/196223/#p196223 fuxter says:
sudo ./ems-flasher --title

should work for you.

]]> Fri, 27 Dec 2013 09:14:44 +0000 https://chipmusic.org/forums/post/196223/#p196223 <![CDATA[Re: Flashing an EMS Smartcart 64m]]> https://chipmusic.org/forums/post/196206/#p196206 Analog says:

you can check the permission with ls -l on the file folder.

anyways have you tried

sudo su (to login as superuser)

and then run the program?

]]> Fri, 27 Dec 2013 00:10:17 +0000 https://chipmusic.org/forums/post/196206/#p196206 <![CDATA[Re: Flashing an EMS Smartcart 64m]]> https://chipmusic.org/forums/post/196203/#p196203 Adil Soubki says:
Analog wrote:

have you tried running the software as superuser?

if sudo lsusb shows it up perhaps is a permission issue.

Or maybe changing the permissions  (chmod 777) over the ttyl1,

or whatever name the system gives to the plugged cart. Good luck!

I am not particularly versed in unix commands so just to be sure you mean to try typing "chmod 777 ems-flasher" then running "./ems-flasher --mycommand"?

I have tried that and it doesn't seem to make a difference.

]]> Thu, 26 Dec 2013 23:52:16 +0000 https://chipmusic.org/forums/post/196203/#p196203 <![CDATA[Re: Flashing an EMS Smartcart 64m]]> https://chipmusic.org/forums/post/196201/#p196201 Analog says:

have you tried running the software as superuser?

if sudo lsusb shows it up perhaps is a permission issue.

Or maybe changing the permissions  (chmod 777) over the ttyl1,

or whatever name the system gives to the plugged cart. Good luck!

]]> Thu, 26 Dec 2013 23:45:38 +0000 https://chipmusic.org/forums/post/196201/#p196201 <![CDATA[Flashing an EMS Smartcart 64m]]> https://chipmusic.org/forums/post/196200/#p196200 Adil Soubki says:

So I am trying to flash my cartridge using virtualbox running linux (ubuntu). I compiled the code from the following website:

http://lacklustre.net/projects/ems-flasher/

However although when I type into terminal "sudo lsusb" the cartridge shows up, when I run any of the compiled executables to do something it says it can't find the cartridge. Are there drivers I need to install? I'm pretty confused it seems like everything is in place and it still can't seem to notice the cartridge.

Here is a terminal shot of the issue.

http://imgur.com/gv1QEW3

Any advice would be appreciated, thanks!

]]> Thu, 26 Dec 2013 23:27:14 +0000 https://chipmusic.org/forums/post/196200/#p196200