<![CDATA[ChipMusic.org - Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/topic/13287/would-a-getlofi-kit-work-in-a-nes/ Tue, 28 Jan 2014 23:24:52 +0000 PunBB <![CDATA[Re: Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/post/199285/#p199285 bitjacker says:

did you use a trim resistor (dmg)? if so where and what value

]]> Tue, 28 Jan 2014 23:24:52 +0000 https://chipmusic.org/forums/post/199285/#p199285 <![CDATA[Re: Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/post/199272/#p199272 DMGer says:

Yeah I also used one in a DMG. My gut tells me the NES is different though. I'll install everything and cut the trace after and post results. wink

]]> Tue, 28 Jan 2014 22:10:24 +0000 https://chipmusic.org/forums/post/199272/#p199272 <![CDATA[Re: Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/post/199251/#p199251 bitjacker says:

i bought a couple of these awhile back. i use mine in a dmg and its powerful enough to not need a trace cut

]]> Tue, 28 Jan 2014 15:59:25 +0000 https://chipmusic.org/forums/post/199251/#p199251 <![CDATA[Re: Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/post/199211/#p199211 DMGer says:

I might just add a switch between the two then sooner or later. Thanks!

]]> Tue, 28 Jan 2014 03:08:02 +0000 https://chipmusic.org/forums/post/199211/#p199211 <![CDATA[Re: Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/post/199196/#p199196 yogi says:

Should work fine with either mod. The PCB should make your mod very easy.
You should be able to use the LTC with either mod. The first how-to over clocks the whole NES, both the CPU and the PPU;  the second is over clocking just the CPU. Which is better? IDK, but it seems like you could try both (one at a time) to test what you like the best.
I would def like to know what you find.
Yogi

]]> Mon, 27 Jan 2014 23:45:20 +0000 https://chipmusic.org/forums/post/199196/#p199196 <![CDATA[Would a Getlofi kit work in a NES?]]> https://chipmusic.org/forums/post/199171/#p199171 DMGer says:

So here's the kit:
http://getlofi.com/shop/ltc1799-precisi … h-control/

I'm assuming it would work but I'm not sure which trace to cut.

On this French site they used a LTC1799 so I'm assuming I should follow this.

http://furrtek.free.fr/?a=nesclock

But there's also this site...

http://kyorune.com/modding/article.php?id=67

So would I be able to install the kit? If so which trace should I cut?

]]> Mon, 27 Jan 2014 20:49:36 +0000 https://chipmusic.org/forums/post/199171/#p199171