<![CDATA[ChipMusic.org - How to get a Volca Bass to stop modulating?]]> https://chipmusic.org/forums/topic/13787/how-to-get-a-volca-bass-to-stop-modulating/ Mon, 31 Mar 2014 21:36:29 +0000 PunBB <![CDATA[Re: How to get a Volca Bass to stop modulating?]]> https://chipmusic.org/forums/post/204903/#p204903 Fudgers says:

It looks like this guy's software (http://www.fabriziopoce.com/download.html) has a key tracking on/off feature where any value >0 = on, so I'm assuming it's a CC message. He has an FAQ answer that basically describes your situation (http://www.fabriziopoce.com/VC_FAQ.html)

I did a little research and couldn't find a good midi datasheet, but his software is only $8 , so maybe it'd be easier than reselling the thing?

EDIT: the plot thickens! apparently that software only imitates keytracking via clever CC, so unless you are already using it to control your Volca Bass, it shouldn't have a keytracking function at all

refer to: (http://www.korgforums.com/forum/phpBB2/ … 06e2bd09f0)

]]> Mon, 31 Mar 2014 21:36:29 +0000 https://chipmusic.org/forums/post/204903/#p204903 <![CDATA[Re: How to get a Volca Bass to stop modulating?]]> https://chipmusic.org/forums/post/204845/#p204845 Limitbreak says:

I'm bumping this out of desperation before I either throw this thing out the window or toss it back up on Ebay from which it came.

]]> Mon, 31 Mar 2014 03:26:58 +0000 https://chipmusic.org/forums/post/204845/#p204845 <![CDATA[How to get a Volca Bass to stop modulating?]]> https://chipmusic.org/forums/post/204213/#p204213 Limitbreak says:

I know some of you have Volca Basses. I've ran into a bit of an issue. I'll quote the post I made on the Korg Forums since I posted this there as well...Interestingly enough I've received no response. Any input would be appreciated.

Limitbreak wrote:

So I picked up a Volca Bass not long ago and have ran into a slight issue. My Volca is fluctuating the modulation of my notes when all of the knobs except the cutoff are set to a zero value. I am using Ableton live to control my Volca. I've also cleared out all the sequencer data by holding function and pressing step 16. I'm playing a very basic beat and bassline, a bass note in between every kick drum in a 4/4 beat.

To my understanding and research, it is due to KeyTracking and the Volca Bass refreshing the cutoff value with ever incoming MIDI note. I've read that there is a way to turn it off but have not been able to figure out how to do so. It just seems silly that the Volca wouldn't be able to play a solid, consistent bass note...there must be a way to fix it.

]]> Mon, 24 Mar 2014 21:31:57 +0000 https://chipmusic.org/forums/post/204213/#p204213