<![CDATA[ChipMusic.org - Arduinoboy Help]]> https://chipmusic.org/forums/topic/14202/arduinoboy-help/ Thu, 01 May 2014 00:50:22 +0000 PunBB <![CDATA[Re: Arduinoboy Help]]> https://chipmusic.org/forums/post/207403/#p207403 Monotron says:

Well I got it worked out, turns out it has to be set to channel 115 or above or the midi will already be in use. who knew

]]> Thu, 01 May 2014 00:50:22 +0000 https://chipmusic.org/forums/post/207403/#p207403 <![CDATA[Re: Arduinoboy Help]]> https://chipmusic.org/forums/post/207338/#p207338 Monotron says:
uXe wrote:

...some cheap cables aren't up to spec:

http://chipmusic.org/forums/topic/13398 … rduinoboy/

I saw this post already (post purchase mind you) and it seems the people who purchased this cable seem to have no problems or can at least send midi clock to and from. I haven't gotten a single response sync or actually notes so I'm not sure if it is the cable. If it is I can save up and buy a better one but I don't want to resort to that unless I know for sure it's the cable

]]> Wed, 30 Apr 2014 05:59:23 +0000 https://chipmusic.org/forums/post/207338/#p207338 <![CDATA[Re: Arduinoboy Help]]> https://chipmusic.org/forums/post/207336/#p207336 uXe says:

...some cheap cables aren't up to spec:

http://chipmusic.org/forums/topic/13398 … rduinoboy/

]]> Wed, 30 Apr 2014 04:00:34 +0000 https://chipmusic.org/forums/post/207336/#p207336 <![CDATA[Re: Arduinoboy Help]]> https://chipmusic.org/forums/post/207334/#p207334 Monotron says:

Notes, and mGB. And I tried Ableton as well. I tried master mode as well as midi and slave. When I put it in master the LED's respond to the beat as normal, but I can't seem to get it to send to the PC when I try to map the midi in Fl or ableton.

]]> Wed, 30 Apr 2014 03:37:49 +0000 https://chipmusic.org/forums/post/207334/#p207334 <![CDATA[Re: Arduinoboy Help]]> https://chipmusic.org/forums/post/207332/#p207332 dotmicro says:

What are you sending to the Gameboy? MIDI clock, notes or CC? and is it for LSDJ or mGB?

Not too familiar with FL studio but if you want to configure MIDI SYNC output in ableton you just need to enable MIDI out clock sync in the preferences options.

May also want to try the testing with LSDJ in master mode. If you connect the arduinoboy up and set to MASTER mode on the arduinoboy and in LSDJ, you should get the LED's blinking regardless of whats connected to the MIDI din connectors. At least then you can see if the connection between the GB and arduinoboy is working.

Hope some of my ramblings help smile

]]> Wed, 30 Apr 2014 03:23:50 +0000 https://chipmusic.org/forums/post/207332/#p207332 <![CDATA[Arduinoboy Help]]> https://chipmusic.org/forums/post/207328/#p207328 Monotron says:

Don't worry, I searched before making this topic first, for hours. I recently received my arduinoboy from Xiwi Electronics, pre-built because I'm lazy. Anyways, I hooked it up, and hooked up my midi to usb cable and started it up. The device seems to work fine, as does the cable, but I can't send midi to the gameboy and the gameboy won't sync to FL studio. I set the port to 1, and tried channels 1-4 and nothing. Is it something I'm doing wrong? Is the cable not compatible? If so what cable would be? Help, please before I go insane.

EDIT: http://www.amazon.com/HDE-Cable-Convert … s=midi+usb The cable I'm using

]]> Wed, 30 Apr 2014 02:52:10 +0000 https://chipmusic.org/forums/post/207328/#p207328