<![CDATA[ChipMusic.org - Is there MGB only version of Arduinoboy?]]> https://chipmusic.org/forums/topic/14566/is-there-mgb-only-version-of-arduinoboy/ Wed, 18 Jun 2014 01:46:39 +0000 PunBB <![CDATA[Re: Is there MGB only version of Arduinoboy?]]> https://chipmusic.org/forums/post/211259/#p211259 friendofmegaman says:
Boner wrote:

in the main sketch file change these lines

boolean alwaysUseDefaultSettings = false;  //set to true to always use the settings below, else they are pulled from memory for the software editor

0x00, //force mode (forces lsdj to be sl)
0x00, //mode

to

boolean alwaysUseDefaultSettings = true;

0x01, //force mode
0x05, //mode

so force mode is enabled, and //mode is the mode you want it to be forced to, in this case mode 5 - MGB. Leave out all the LEDs besides status. tie pin 3 to ground so the mode isn't accidentally switched. you can do this to make a stripped down arduinoboy for any mode.


Thanks a ton mate!

]]> Wed, 18 Jun 2014 01:46:39 +0000 https://chipmusic.org/forums/post/211259/#p211259 <![CDATA[Re: Is there MGB only version of Arduinoboy?]]> https://chipmusic.org/forums/post/211247/#p211247 Boner says:

in the main sketch file change these lines

boolean alwaysUseDefaultSettings = false;  //set to true to always use the settings below, else they are pulled from memory for the software editor

0x00, //force mode (forces lsdj to be sl)
0x00, //mode

to

boolean alwaysUseDefaultSettings = true;

0x01, //force mode
0x05, //mode

so force mode is enabled, and //mode is the mode you want it to be forced to, in this case mode 5 - MGB. Leave out all the LEDs besides status. tie pin 3 to ground so the mode isn't accidentally switched. you can do this to make a stripped down arduinoboy for any mode.

]]> Tue, 17 Jun 2014 22:29:34 +0000 https://chipmusic.org/forums/post/211247/#p211247 <![CDATA[Re: Is there MGB only version of Arduinoboy?]]> https://chipmusic.org/forums/post/211242/#p211242 Jazzmarazz says:

I don't think anyone has stripped it, but the LEDs are actually useful beyond mode-designation. They will flash with MIDI activity on each channel.

]]> Tue, 17 Jun 2014 21:54:37 +0000 https://chipmusic.org/forums/post/211242/#p211242 <![CDATA[Is there MGB only version of Arduinoboy?]]> https://chipmusic.org/forums/post/211239/#p211239 friendofmegaman says:

Is there some kind of a stripped version of the Arduinoboy with only one mode - MGB that is?

It is actually trivial to change the code to run in the MGB mode by default and ditch the button and LEDs, but I hate when there's more code than actually needed. Strip the code is also not a big deal but what's the point if someone has already done that.

This stripped version could fit into a GBC. There's definitely no room for 2 MIDI jacks, but one is actually doable (but please don't tell me to use audio jacks for MIDI outputs I'm aware of this method and I don't like it :b ). Thanks smile

]]> Tue, 17 Jun 2014 21:47:51 +0000 https://chipmusic.org/forums/post/211239/#p211239