<![CDATA[ChipMusic.org - Relocating DC converter board]]> https://chipmusic.org/forums/topic/14752/relocating-dc-converter-board/ Mon, 14 Jul 2014 04:25:28 +0000 PunBB <![CDATA[Re: Relocating DC converter board]]> https://chipmusic.org/forums/post/213122/#p213122 12ianma says:

30awg has worked for me before aswell.

]]> Mon, 14 Jul 2014 04:25:28 +0000 https://chipmusic.org/forums/post/213122/#p213122 <![CDATA[Re: Relocating DC converter board]]> https://chipmusic.org/forums/post/213072/#p213072 JOBO says:

Thanks guys, I ended up going with some 26 Awg wire. I threw the old Final Fantasy Adventure cart in and gamed for 20 minutes and everything seems to be nice and cool on the inside.




messy but functional

]]> Sat, 12 Jul 2014 23:09:22 +0000 https://chipmusic.org/forums/post/213072/#p213072 <![CDATA[Re: Relocating DC converter board]]> https://chipmusic.org/forums/post/213069/#p213069 friendofmegaman says:

I once used 32 AWG and it didn't overheat and still doesn't. Typically though I'd use 28.

]]> Sat, 12 Jul 2014 18:15:19 +0000 https://chipmusic.org/forums/post/213069/#p213069 <![CDATA[Re: Relocating DC converter board]]> https://chipmusic.org/forums/post/213056/#p213056 Jazzmarazz says:

Too thin. Find an old IDE cable and cut it to length.

]]> Sat, 12 Jul 2014 11:58:03 +0000 https://chipmusic.org/forums/post/213056/#p213056 <![CDATA[Relocating DC converter board]]> https://chipmusic.org/forums/post/213053/#p213053 JOBO says:

I am looking to relocate my DC converter board from left side to right side. Is there a preferred gauge of wire that works best? I'm afraid my electrical knowledge is limited and I'm a noob when it comes to modding... I don't want to run the risk of overheating the board. I had planned to use 30 awg wire, is this too thin? I've never done this before and I figured I should ask the professionals wink

(The most relevant thread for dc converter boards would not let me bump)

]]> Sat, 12 Jul 2014 09:13:43 +0000 https://chipmusic.org/forums/post/213053/#p213053