<![CDATA[ChipMusic.org - Gba Sp Inside Dmg button wiring help]]> https://chipmusic.org/forums/topic/14767/gba-sp-inside-dmg-button-wiring-help/ Wed, 16 Jul 2014 02:24:21 +0000 PunBB <![CDATA[Re: Gba Sp Inside Dmg button wiring help]]> https://chipmusic.org/forums/post/213291/#p213291 dsv101 says:

These might help? http://store.kitsch-bent.com/product/co … button-pcb

Along with the guide from the description: http://forums.modretro.com/viewtopic.ph … mp;t=11746

Modretro is a good forum for this kind of thing to, if you run into any other problems.

]]> Wed, 16 Jul 2014 02:24:21 +0000 https://chipmusic.org/forums/post/213291/#p213291 <![CDATA[Re: Gba Sp Inside Dmg button wiring help]]> https://chipmusic.org/forums/post/213290/#p213290 Crashmast says:

..

]]> Wed, 16 Jul 2014 02:14:16 +0000 https://chipmusic.org/forums/post/213290/#p213290 <![CDATA[Gba Sp Inside Dmg button wiring help]]> https://chipmusic.org/forums/post/213169/#p213169 JOBO says:

The past few days I have started my first attempt at slapping a gb sp inside a Dmg housing. Everything has gone surprisingly well and I have found relevant info online to complete most of the steps. One of the steps that I can't seem to find is how to connect the Dmg buttons with the Gb sp board. I understand that it is simple step to most people undertaking this mod, but I figured I would learn it on the fly haha. I'm looking for a really clear description/ picture so that I know its done properly. I have found bits and pieces but never the whole process.
I have also read about the common ground Pcb that Kitsch sells. Is that basically running one ground to the pcb and then single wires from each respective button? I'm sorry that i'm such a noob lol


Once I have the buttons all good to go there isn't much left to do!

]]> Mon, 14 Jul 2014 19:45:30 +0000 https://chipmusic.org/forums/post/213169/#p213169