<![CDATA[ChipMusic.org - Arduinoboy trouble]]> https://chipmusic.org/forums/topic/16758/arduinoboy-trouble/ Sun, 13 Sep 2015 11:00:36 +0000 PunBB <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/234520/#p234520 ThaNerd says:

Hello,

I don't know if i should make a new thread or reuse this one. I also have trouble making an arduinoboy. Actually, everything seems to work, but neither LSDJ nor mGB seem to receive data.
I've made a little video of my current setup:
https://www.youtube.com/watch?v=vxaYVNTi5wQ

]]> Sun, 13 Sep 2015 11:00:36 +0000 https://chipmusic.org/forums/post/234520/#p234520 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231797/#p231797 Timbob says:

I can't see a resistor on that schematic that goes from the button to ground... It is on the original one tho. You need one or else pin 5 will think it's still connected.

]]> Fri, 26 Jun 2015 10:04:14 +0000 https://chipmusic.org/forums/post/231797/#p231797 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231775/#p231775 jefftheworld says:

Use a multimeter and make sure nothing is bridging those pins/pads.

]]> Thu, 25 Jun 2015 19:04:03 +0000 https://chipmusic.org/forums/post/231775/#p231775 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231772/#p231772 maniacfreakquency says:

I builded the same arduinoboy kit, I just followed the video instructions and it worked https://www.youtube.com/watch?v=13adGnZoC9E Sorry for my bad English

]]> Thu, 25 Jun 2015 17:59:59 +0000 https://chipmusic.org/forums/post/231772/#p231772 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231747/#p231747 stress_tn says:

No, resistor between 4.7k and 10k not help!(

]]> Wed, 24 Jun 2015 19:55:20 +0000 https://chipmusic.org/forums/post/231747/#p231747 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231695/#p231695 Jazzmarazz says:
stress_tn wrote:

My switch is NO. I mean that buton not soldered, I pull out it, and there are no contact between PB1 and PB2.
10k to the 4.7k place? strange but I'll try.

No, use a resistor between 4.7k and 10k instead of the 2k ohm resistor.

]]> Tue, 23 Jun 2015 14:02:59 +0000 https://chipmusic.org/forums/post/231695/#p231695 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231684/#p231684 stress_tn says:

My switch is NO. I mean that buton not soldered, I pull out it, and there are no contact between PB1 and PB2.
10k to the 4.7k place? strange but I'll try.

]]> Tue, 23 Jun 2015 06:12:04 +0000 https://chipmusic.org/forums/post/231684/#p231684 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231672/#p231672 Jazzmarazz says:

Try a 4.7k to 10k resistor.

]]> Mon, 22 Jun 2015 23:38:57 +0000 https://chipmusic.org/forums/post/231672/#p231672 <![CDATA[Re: Arduinoboy trouble]]> https://chipmusic.org/forums/post/231671/#p231671 jefftheworld says:

Is your switch NC or NO?

]]> Mon, 22 Jun 2015 23:16:56 +0000 https://chipmusic.org/forums/post/231671/#p231671 <![CDATA[Arduinoboy trouble]]> https://chipmusic.org/forums/post/231669/#p231669 stress_tn says:

Hello friends. I have trouble with my arduinoboy. I soldered 1 piece and when I turn it on it always change mode. Leds changed and I don't understand what is going on. I solder this kit https://www.dropbox.com/s/gjk89h42zmusw … s.pdf?dl=0
Button contacts not connected I checked. May be something soldered togeather, but don't understand what.
And one strange thing: I cheked 2 k'ohm resitor (button resistor), when it soldered in the device tester show 1.06 k.om

]]> Mon, 22 Jun 2015 22:38:22 +0000 https://chipmusic.org/forums/post/231669/#p231669