<![CDATA[ChipMusic.org - Roland Mx 5 - Mixer slider Left/Right volume problem/stutter]]> https://chipmusic.org/forums/topic/16933/roland-mx-5-mixer-slider-leftright-volume-problemstutter/ Tue, 04 Aug 2015 17:31:08 +0000 PunBB <![CDATA[Re: Roland Mx 5 - Mixer slider Left/Right volume problem/stutter]]> https://chipmusic.org/forums/post/233281/#p233281 Jazzmarazz says:

That's what I wanted to say. Broken solder, dirty pot or broken pot. The only way to see is to open her up and find out.

]]> Tue, 04 Aug 2015 17:31:08 +0000 https://chipmusic.org/forums/post/233281/#p233281 <![CDATA[Re: Roland Mx 5 - Mixer slider Left/Right volume problem/stutter]]> https://chipmusic.org/forums/post/233275/#p233275 RatShack says:

It sounds like it could be a broken solder joint or broken slide pots if physically touching it causes/fixes the problem.

]]> Tue, 04 Aug 2015 14:42:06 +0000 https://chipmusic.org/forums/post/233275/#p233275 <![CDATA[Roland Mx 5 - Mixer slider Left/Right volume problem/stutter]]> https://chipmusic.org/forums/post/233271/#p233271 CS says:

Have an issue with a mixer I used, Channel 1/2 and 3/4  volume's sliders no longer work very well.

Whenever I slide the volume slider up or down the left phono is still silent at times even with the volume up while the right phono is fine. Only when wiggling the Volume slider does the left phono switch back on, this can create tiresome instances having to reconnect the phono every time sliding the volume slider and unequal volume levels to the other channels.

Channels 5/6, 7/8 work fine.

I took the equipment apart and cleaned it, though unfortunately it still stutters in volume whenever I touch the slider.

Has anyone else encountered this issue before with stuttering/broken volume sliders?

Thanks

]]> Tue, 04 Aug 2015 13:08:12 +0000 https://chipmusic.org/forums/post/233271/#p233271