<![CDATA[ChipMusic.org - Adding color case LEDs]]> https://chipmusic.org/forums/topic/18673/adding-color-case-leds/ Sat, 18 Jun 2016 04:36:08 +0000 PunBB <![CDATA[Re: Adding color case LEDs]]> https://chipmusic.org/forums/post/245167/#p245167 nanode says:
MaxDolensky wrote:

It is actually that simple. Calculate what all you can run off of 5V, wire it up in the case. Add a resistor if the math calls for it. 5V on one side, ground on the other.

Gotcha. Also found a nice pinout:
https://cdn.shopify.com/s/files/1/0689/ … 1455042687

]]> Sat, 18 Jun 2016 04:36:08 +0000 https://chipmusic.org/forums/post/245167/#p245167 <![CDATA[Re: Adding color case LEDs]]> https://chipmusic.org/forums/post/245136/#p245136 MaxDolensky says:

It is actually that simple. Calculate what all you can run off of 5V, wire it up in the case. Add a resistor if the math calls for it. 5V on one side, ground on the other.

]]> Fri, 17 Jun 2016 06:09:35 +0000 https://chipmusic.org/forums/post/245136/#p245136 <![CDATA[Adding color case LEDs]]> https://chipmusic.org/forums/post/245127/#p245127 nanode says:

Hey all!

So I'm about to do a mod that I've been planning for a while, though Thursday Customs doesn't seem to have RGB LED's in stock for buttons.

I was wondering if anybody has had any luck finding a way to add RGB LED's without the above mentioned method, and how you'd go about executing it. I'd imagine it would only take finding ground and pos/neg points on the front board.

Any input would be greatly appreciated.

Thanks!
-Sam

]]> Fri, 17 Jun 2016 01:24:33 +0000 https://chipmusic.org/forums/post/245127/#p245127