He didn't add support for the Teensy 2.0, so it is not officially supported. Only the noiseinabox port works on the 2.0. :<

Doesn't compile with Teensy 2.0 I've ordered a few of these after I've seen Teensyboy port by NoizeInABox... sure I also have 2 3.2 and 2 LC, but that's kind of a pain :-/

I'll try to see if I can fix the compile errors, and will send information somewhere (probably on GitHub?), but as I suck, I'll probably give up before everything's fixed...

Yes.

Trash80 put out a fix today (thanks btw!)

Is the LLS mandatory?

I wanted to try it out since I had a Teensy LC on hand, but I got the error as well. This would be great for cutting cost, size, and parts down quite a bit, though. All you really need is a link cable and the mcu.

Tempted to pick up a 3.2, but it'd be great to see it working on the LC!

Edit: I have a curse where I post on a forum about a problem and fix it myself within 5 minutes. It's convenient but makes me look like an idiot

It compiled fine using 48MHz (optimized) for CPU speed. Make sure you set your USB Type as MIDI as well!

edit edit: logic level shifter too

Sorry to bump this. Has anyone tried this with the Teensy LC?

I've been getting this error when compiling.

Error: lo register required -- `sub ip,#1'

on mine you have the unsoldered pins you can hook a FTDI cable up to. Fwiw you dont need to update the code to use the same old modes.

i am a noob, does anyone know if it's possible to update the arduinoboy from thursdaycustoms?

Yeah, my bad. I forgot that I actually verify version numbers using sysex and never updated the editor.

bingo.   that one must have gone up just moments after i downloaded the original.

thanks

Tim uploaded a fixed version of maxpat to handle this, can you download and try again?

https://github.com/trash80/Arduinoboy/t … ter/Editor

Very cool.   I loaded the new versions last weekend. 

Anyone else having trouble connection to the editor?     It seems to send info, but never really "connects' and doesnt load the current setting.   I have to enter all the channels, cc #'s   etc each time ....always displays default.   using a Mac and MOTU ultralite MK3  interface.   previous versions worked perfectly.

Trash80 could a DMG send an audio pulse from the noise channel, out a prosound jack into aboy if I added a 1/8th jack to aboy? Aboy could average the click track every two, then convert it to midi clock, and send it with the other midi info.

I think I found a hardware fix and I'm waiting on it to arrive, but it would be nice to just use arduino boy.

This is awesome! I'll have to try the Teensy for USB MIDI. Thanks alot for keeping developing this great project!

YES!!