<![CDATA[ChipMusic.org - Soldering to CPU on DMG-CPU-07...can it be done?]]> https://chipmusic.org/forums/topic/19529/soldering-to-cpu-on-dmgcpu07can-it-be-done/ Sun, 19 Mar 2017 23:00:39 +0000 PunBB <![CDATA[Re: Soldering to CPU on DMG-CPU-07...can it be done?]]> https://chipmusic.org/forums/post/251730/#p251730 Jazzmarazz says:

yeah, following the leads will work just fine. However, if you prefer to use the 04, you can just swap taht board into the better shell.
I suggest modifying the newer CPU revision though

]]> Sun, 19 Mar 2017 23:00:39 +0000 https://chipmusic.org/forums/post/251730/#p251730 <![CDATA[Soldering to CPU on DMG-CPU-07...can it be done?]]> https://chipmusic.org/forums/post/251729/#p251729 toasterpastries says:

I bought the RGB backlight controller from BennVenn to use with a RGBx3 from Kitsch-Bent. I need to solder to 62-66 and 69 on the CPU, but when I cracked open the DMG I wanted to use, it's a CPU-07 with the black goop of doom on the chips.
Can I follow the leads and try soldering somewhere besides the CPU legs, or should I bag it and use the CPU-04 I have here even though it's in rougher condition?

]]> Sun, 19 Mar 2017 22:41:50 +0000 https://chipmusic.org/forums/post/251729/#p251729