<![CDATA[ChipMusic.org - syncing nano//mono//monotribe]]> https://chipmusic.org/forums/topic/20309/syncing-nanomonomonotribe/ Sun, 28 Jan 2018 19:11:11 +0000 PunBB <![CDATA[Re: syncing nano//mono//monotribe]]> https://chipmusic.org/forums/post/255243/#p255243 shitbird says:

also if monotribe has cv output you can slave both nlmono and nl2 (check manuals for analog sync modes). Tribe to analog adapter to split link cable to the boys.This way if monotribe has a swing mode it can be applied to nanoloop as well hhhnnnng

]]> Sun, 28 Jan 2018 19:11:11 +0000 https://chipmusic.org/forums/post/255243/#p255243 <![CDATA[Re: syncing nano//mono//monotribe]]> https://chipmusic.org/forums/post/255097/#p255097 Analylogiq says:

you'll have to set a Master and then split the signal

well the monotribe should have sync in and out....

so nl2 into monotribe
and monotribe to mono

for example

I do use this to split my signal thx low gain

https://www.flickr.com/photos/lameboymu … 419956111/

]]> Tue, 16 Jan 2018 16:55:13 +0000 https://chipmusic.org/forums/post/255097/#p255097 <![CDATA[Re: syncing nano//mono//monotribe]]> https://chipmusic.org/forums/post/255092/#p255092 infradead says:

plug into the sync with a 3.5 mm cable and you're good to go. 
i use it with my nano mono and a modular / monotribe / pocket operator all the time

]]> Tue, 16 Jan 2018 06:08:47 +0000 https://chipmusic.org/forums/post/255092/#p255092 <![CDATA[syncing nano//mono//monotribe]]> https://chipmusic.org/forums/post/255090/#p255090 frank angotti is dead says:

how would I go about syncing nanoloop2// nanoloop mono AND a monotribe?
I have two of catskulls analog adapters if that helps at all and other goodies.

]]> Tue, 16 Jan 2018 03:23:30 +0000 https://chipmusic.org/forums/post/255090/#p255090