<![CDATA[ChipMusic.org - Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/topic/8155/arduinoboy-no-leds-on-midi-in/ Sat, 15 Sep 2012 02:40:47 +0000 PunBB <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/132896/#p132896 cc0919 says:

Should also mention that the midi cable is fine, tested it with 2 keyboards

]]> Sat, 15 Sep 2012 02:40:47 +0000 https://chipmusic.org/forums/post/132896/#p132896 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/132895/#p132895 cc0919 says:

Any ideas? Gameboy is wired to it and providing power, i've tried reversing the wires for the midi, and still nothing...I'm pretty sure the rest is wired right, it boots up correctly and I'm using a pcb...

]]> Sat, 15 Sep 2012 02:38:49 +0000 https://chipmusic.org/forums/post/132895/#p132895 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127748/#p127748 cc0919 says:

Interestingly, I checked out the LEDs with a multimeter and both were dead! Got a much bigger problem now, I'm gunna post a new topic sad

]]> Sat, 18 Aug 2012 22:24:08 +0000 https://chipmusic.org/forums/post/127748/#p127748 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127441/#p127441 RyuX says:

I dont know for keyboard, but on midi clock the lights will light up no matter if a GB is connected.. so i guess the same goes for keyboard!
I know many people who think they wired everything correct, be careful on the schematic, some things arent 100 % clear!
i never had 2 broken LED's at once, this is very unlikely if 2 out of 6 dont work. I guess you have something wired up wrong.
Double check the wiring and after that, repeat the process big_smile

]]> Fri, 17 Aug 2012 20:46:22 +0000 https://chipmusic.org/forums/post/127441/#p127441 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127396/#p127396 herr_prof says:

Have strength!

]]> Fri, 17 Aug 2012 15:38:07 +0000 https://chipmusic.org/forums/post/127396/#p127396 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127390/#p127390 cc0919 says:

Yea, it is...was just hoping somebody knew off the top of their head, waiting to get the link cable to know if it is working or not may kill me.

]]> Fri, 17 Aug 2012 15:28:39 +0000 https://chipmusic.org/forums/post/127390/#p127390 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127389/#p127389 herr_prof says:

I dont have the ability to test on mine if you need the dmg connected to see the midi i/o.. but i guess thats the next step to test.

]]> Fri, 17 Aug 2012 15:27:15 +0000 https://chipmusic.org/forums/post/127389/#p127389 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127384/#p127384 cc0919 says:

It's being powered by a 9v, since I don't believe the link cable my roommate has has the power pin (although I'll probably do the mod at some point.) But yes, a 9v battery at the moment with a voltage regulator

]]> Fri, 17 Aug 2012 15:00:36 +0000 https://chipmusic.org/forums/post/127384/#p127384 <![CDATA[Re: Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127380/#p127380 herr_prof says:

Normally you'd power the aboy from the link port, if not link cable is attached, how are you powering it?

]]> Fri, 17 Aug 2012 14:12:24 +0000 https://chipmusic.org/forums/post/127380/#p127380 <![CDATA[Arduinoboy: No LEDs on MIDI In]]> https://chipmusic.org/forums/post/127345/#p127345 cc0919 says:

Hello all,

I'm new here,  but hoping to get a bit of help. I built an arduinoboy tonight, and everything seemed to go fine. Unfortunately, I do not have a link cable to test with, so I'm unable to test with an actual gameboy (pretty stupid right?) I was able to get things working from an aesthetic level (when switched on, LEDs light up, although 2 do not. Not sure if that is a bad LED issue or not.) The problem is that when I connect my keyboard to the midi in jack....nothing happens. No lights. Is this due to the gameboy not being connected? I'm really hoping it is, because the midi is wired up correctly...

Thanks,

Christian

]]> Fri, 17 Aug 2012 05:15:54 +0000 https://chipmusic.org/forums/post/127345/#p127345