<![CDATA[ChipMusic.org - performance inquiries]]> https://chipmusic.org/forums/topic/8299/performance-inquiries/ Fri, 31 Aug 2012 23:31:44 +0000 PunBB <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/130358/#p130358 optimuschad says:

Hah I use a presonus mixer that lets me control the gain and that's about it. I love the grit of the DMG and GBC. But you should look into the pissbox from Datathrash and kitsch

]]> Fri, 31 Aug 2012 23:31:44 +0000 https://chipmusic.org/forums/post/130358/#p130358 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129910/#p129910 basspuddle says:
nickmaynard wrote:

i'm selling this mixer for $20.

very similar to the ones basspuddle posted. not as detailed as the one egr posted but it should work great for what you want it for. i actually bought it specifically to use with my 2xDMG set up.

Whoo, mentioned by Mr. Maynard himself! I feel so special. If I get* any money, I may buy that from you.

]]> Thu, 30 Aug 2012 04:40:06 +0000 https://chipmusic.org/forums/post/129910/#p129910 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129905/#p129905 herr_prof says:

The realistic moog is nothing like the taurus. Its fun though if you can find one in your uncles attic or something.

]]> Thu, 30 Aug 2012 03:16:28 +0000 https://chipmusic.org/forums/post/129905/#p129905 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129876/#p129876 ForaBrokenEarth says:
nickmaynard wrote:

i'm selling this mixer for $20.

very similar to the ones basspuddle posted. not as detailed as the one egr posted but it should work great for what you want it for. i actually bought it specifically to use with my 2xDMG set up.

If I remember correctly, realistic was an in-house brand for radio shack in the 80's, it's likely the internals of the basically the same.

(Slight tangent) Moog designed and manufactured an analogue synth for the realistic brand which was sold as the "realistic concertmate MG-1" apparently it's very similar to the moog taurus.

]]> Thu, 30 Aug 2012 00:15:49 +0000 https://chipmusic.org/forums/post/129876/#p129876 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129855/#p129855 nickmaynard says:

i'm selling this mixer for $20.

very similar to the ones basspuddle posted. not as detailed as the one egr posted but it should work great for what you want it for. i actually bought it specifically to use with my 2xDMG set up.

]]> Wed, 29 Aug 2012 20:57:32 +0000 https://chipmusic.org/forums/post/129855/#p129855 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129853/#p129853 basspuddle says:

http://www.ebay.com/sch/i.html?_trksid= … p;_sacat=0
Cheap, used, and good quality.

]]> Wed, 29 Aug 2012 20:44:13 +0000 https://chipmusic.org/forums/post/129853/#p129853 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129794/#p129794 Lazerbeat says:
squidula wrote:

Alright this is my signal flow:
Two gameboys -(aux cables)-> summed into a 1/8 inch y cable -> 1/8 inch to 1/4 inch adapter -> kaoss pad pro -> monitors

this set up sucks. Summing the output of my DMG's is creating a lot of distortion and unwanted compression. Any ideas how can I tweak this for a small intimate performance in two days?

Could you be a hero and clarify the title for me heart?

]]> Wed, 29 Aug 2012 13:16:31 +0000 https://chipmusic.org/forums/post/129794/#p129794 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129789/#p129789 egr says:

My suggestion for the near future:

LINK: http://www.musiciansfriend.com/pro-audi … c=3WWRWXGP

You can find them for well under $100 on eBay.  The best combination of features I've found for a cheap mixer i.e. actual faders, sends on every channel, L and R gain on stereo channels.  Can even run on batteries LOL

]]> Wed, 29 Aug 2012 10:38:12 +0000 https://chipmusic.org/forums/post/129789/#p129789 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129788/#p129788 Jellica says:

something like this is fucking stupid cheap:

http://www.dv247.com/studio-equipment/b … xer--34407

but i'd prefer to get some more pennies together and get something with stereo in & outputs, tape in/outs and send/returns

http://www.dv247.com/studio-equipment/b … xer--31557

]]> Wed, 29 Aug 2012 10:28:46 +0000 https://chipmusic.org/forums/post/129788/#p129788 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129787/#p129787 egr says:

Rent a mixer from a local music shop.

]]> Wed, 29 Aug 2012 09:52:57 +0000 https://chipmusic.org/forums/post/129787/#p129787 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129772/#p129772 chunter says:

Program them mono and put one in L, the other in R. Save for a mixer, or get one of these things...

I understand not being able to get gear, making the most of what is available is an important point of a person's art.

]]> Wed, 29 Aug 2012 05:50:32 +0000 https://chipmusic.org/forums/post/129772/#p129772 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129769/#p129769 Telerophon says:

Maybe take it apart and try to fix it, or call the service center for the manufacturer and see what they'll charge to fix it?

]]> Wed, 29 Aug 2012 05:41:44 +0000 https://chipmusic.org/forums/post/129769/#p129769 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129768/#p129768 squidula says:

the mixer i have was adopted from a home that did not take care of it, and therefore not usable.

]]> Wed, 29 Aug 2012 05:38:32 +0000 https://chipmusic.org/forums/post/129768/#p129768 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129765/#p129765 Frostbyte says:
Saskrotch wrote:

get a mixer

That, or make a summing circuit and an amp. Google how to sum audio sources.

]]> Wed, 29 Aug 2012 05:24:01 +0000 https://chipmusic.org/forums/post/129765/#p129765 <![CDATA[Re: performance inquiries]]> https://chipmusic.org/forums/post/129764/#p129764 Saskrotch says:

get a mixer

]]> Wed, 29 Aug 2012 05:10:15 +0000 https://chipmusic.org/forums/post/129764/#p129764