<![CDATA[ChipMusic.org - DMG running on 3.7v]]> https://chipmusic.org/forums/topic/8754/dmg-running-on-37v/ Wed, 17 Oct 2012 14:39:39 +0000 PunBB <![CDATA[Re: DMG running on 3.7v]]> https://chipmusic.org/forums/post/137887/#p137887 kitsch says:
8-BrickDMG wrote:

I found the answer online after searching around. I'll just leave the link here.
http://blog.gg8.se/wordpress/2009/07/22 … ge-ranges/

thats a great link to be able to reference, thanks!

]]> Wed, 17 Oct 2012 14:39:39 +0000 https://chipmusic.org/forums/post/137887/#p137887 <![CDATA[Re: DMG running on 3.7v]]> https://chipmusic.org/forums/post/137885/#p137885 8-BrickDMG says:

I found the answer online after searching around. I'll just leave the link here.
http://blog.gg8.se/wordpress/2009/07/22 … ge-ranges/

]]> Wed, 17 Oct 2012 14:25:59 +0000 https://chipmusic.org/forums/post/137885/#p137885 <![CDATA[Re: DMG running on 3.7v]]> https://chipmusic.org/forums/post/137444/#p137444 8-BrickDMG says:

Hmmm oh okay then, just to be safe I'll just have one running then.

]]> Sat, 13 Oct 2012 21:29:04 +0000 https://chipmusic.org/forums/post/137444/#p137444 <![CDATA[Re: DMG running on 3.7v]]> https://chipmusic.org/forums/post/137406/#p137406 12ianma says:

They may still come out of balance

]]> Sat, 13 Oct 2012 15:51:48 +0000 https://chipmusic.org/forums/post/137406/#p137406 <![CDATA[Re: DMG running on 3.7v]]> https://chipmusic.org/forums/post/137394/#p137394 8-BrickDMG says:

I wired them in parallel to make it 2000mAh. They were both fully charged before I added them though.

]]> Sat, 13 Oct 2012 14:38:24 +0000 https://chipmusic.org/forums/post/137394/#p137394 <![CDATA[Re: DMG running on 3.7v]]> https://chipmusic.org/forums/post/137393/#p137393 12ianma says:

Did you wire them in series? or parallel? you don't really want to charge l-ion batts and not balance charge cells. like if they are wired in parallel they could come out of balance very easy. Same goes for series

]]> Sat, 13 Oct 2012 14:13:09 +0000 https://chipmusic.org/forums/post/137393/#p137393 <![CDATA[DMG running on 3.7v]]> https://chipmusic.org/forums/post/137388/#p137388 8-BrickDMG says:

Hello everyone, I just had a quick question about the DMG's power draw.

Does it really matter if it is running below 6v or in my case running from 3.7v?

I added 2x rechargeable 3.7v 1000mAh lithium ion batteries into my DMG with a charging circuit
wired to the stock dc jack for charging and everything runs fine. The only difference I've noticed is the brightness
of the backlight which is just a bit darker.

Thanks.

]]> Sat, 13 Oct 2012 13:36:09 +0000 https://chipmusic.org/forums/post/137388/#p137388