nordloef wrote:Yes nanoloop should respond to tempo changes. Have you tried filtering out the midi so you only send midi clock and nothing else?
Ha, yes. I've actually tried just about every combination of filtering signals and nothing made any difference.
So what I'm considering now is a bad wiring of the GB link cable wires, or that I possibly soldered the wrong ones? But there are only two, and I've done a lot of soldering in the past few months so I'm pretty confident with soldering projects.
Are the colors of wires in GB link cables fixed across all makes and models?
I followed little-scales' instructions from here:
http://little-scale.blogspot.com/2011/0
or-16.html
Which say I need to use the blue wire for ground and orange for SI, and the others are unneeded. And I just ordered a brand new cable from Nonfinite and it worked just fine when I tested it out before splicing it up.
I'm just really wracking my brain here thinking for the cause of the problem, and nothing seems to make sense. I'm about to re-solder the GB cable to the Teensy just to be absolutely sure, although at this point I'm thinking that just making an arduinoboy may be my best option.