herr_prof
Offline
Unsubscribe
Jellica wrote:

it sounds like some of you should just start making music using modern PCs tongue

thebitman
Offline

You just need 4 Gameboys, a sync box, 4 carts, 3 link cables, a mixer, and 4 line in cables (and maybe one for line out of the mixer). Have each cart use the same save, be loaded onto the same song (duh), one master and three slaves. Mute three channels on each GB so each one plays one channel of a song. Have all 4 lines going into a mixer. Totally easier than using envelopes. Totally, guys.

SketchMan3
Offline
NC in the US of America

the freeboy color plugin for lmms has a built-in treble and bass eq knob. Fakebit ftw. Just make sure you use a sound degrading filter on the wole thing, cuz the stock sound is too smooth.

edit: oh, this is about volume, not eq.

you only have 3 volume chhoices, right? Maybe you could just make it to loud, then when you get to your big speakers, llower it to 2 or 1 as needed?

Last edited by SketchMan3 (Aug 23, 2012 3:25 pm)

Lazerbeat
Offline
Tokyo, Japan

Also as far as I understand it, LSDJ is very very tight on code space. There isnt a lot of wiggle room to add new things.

waveboy
Offline
Lazerbeat wrote:

Also as far as I understand it, LSDJ is very very tight on code space. There isnt a lot of wiggle room to add new things.

I hope Johan will take such Build-in-Mixer feature into his future LSDJ versions, but still leave the option to code if for those who find it more cool :S

herr_prof
Offline
Unsubscribe

I wouldnt hold my breath.

waveboy
Offline
Aeros wrote:
waveboy wrote:

That was a very arrogant and negative answer and very unusefull for me.

I have look in the manual and found something about “synth screen”, but when I change the volume to 5 at both start and end then it does not adjust my volume wtf?


LSDJ Manual 4.6.6 wrote:

5.4 E: Amplitude Envelope

This command functions in two different ways, depending on which instrument type it is used on.

5.4.1 For Pulse and Noise Instruments
The first value digit sets the initial amplitude (0=min, $F=max); the second
digit sets the release (0,8: no change, 1-7: decrease, 9-$F: increase).

5.4.2 For Wave Instruments
E00 volume 0%
E01 volume 25%
E02 volume 50%
E03 volume 100%

i said, READ THE MANUAL.

I dont know if its my LSDJ there is some kinda of error with, but i get some kind of ”changing” sounds, when i use this ”E” command to reduce the sound in ”table” in pulse.

Last edited by waveboy (Aug 23, 2012 7:08 pm)

snesei
Offline
Detroit, Michigan
waveboy wrote:
Aeros wrote:



i said, READ THE MANUAL.

I dont know if its my LSDJ there is some kinda of error with, but i get some kind of ”click noise” sounds in background, when i use this ”E” command to reduce the sound in ”table” in pulse.

You're composing on a piece of hardware that is more than 20 years old. It has limitations, you just have to find a way to blend those clicks in with the rest of your sound.

Last edited by snesei (Aug 23, 2012 7:14 pm)

Frostbyte
Offline

It's a gameboy, it does that haha

waveboy
Offline
snesei wrote:

You're composing on a piece of hardware that is more than 20 years old. It has limitations, you just have to find a way to blend those clicks in with the rest of your sound.

I make this short:
What I basically want is my ”wav” channel louder than my ”pulse” channel.
I have the drums on the wav channel and I want the rhythm/drums to be louder, than the bass, which I have on the pulse channel.

Age is not a conclusion on something, I have instruments that’s over 30 years old (my Korg ms-10 example) and they still sounds brilliant!

Aeros
Offline
Savannah, Georgia

lower the volume on the pulse channel and experiment with the WAV instrument you're using to try and get it louder. that's about all you can do.

Frostbyte
Offline

Clicks are because it's a gameboy and that's just how it is. A gameboy was never meant to be a Casio. Clicks are just something everyone has to deal with. As for wanting WAV to be louder than pulse, lower your pulse volumes. Simple.

Auxcide
Offline
The Multiverse ::: [CA, Sac]

Use an AGS-001.

waveboy
Offline
Aeros wrote:

lower the volume on the pulse channel and experiment with the WAV instrument you're using to try and get it louder. that's about all you can do.

Thanks to you Aeros i have dig more into my manual.

From what I can conclude is two options in pulse channel in the “table patterns”

VOL – which can be used to lower the sound, but when I lower it too much then I get those “click” sounds and changing the sound to vibrato something.
E CMD – which give me both the click sounds and changing the sound to something with vibrato something.

Conclusion:
Pest or AIDS

waveboy
Offline
Auxcide wrote:

Use an AGS-001.

It says here that SP has a bad sound > http://www.herbertweixelbaum.com/comparison.htm

herr_prof
Offline
Unsubscribe

I wouldnt call it bad, its "different".