Offline

What type of wire is easiest in use/ does most people use for modding DMGs? I want to do prosound, bivertion and pitchmod and afterwards be able to properly close my DMG smile.

Thank you

Offline
Michigan

Most wire between 26 and 30 gauge will work. Closing the shell is no problem, placement of the wire is the problem. You must make sure the wire does not rest underneath any of the supporting plastic that makes contact with the other side of the shell/pcb when closed.

Offline
Joliette, QC, Canada

I used a 28 gauge at my job since the one I got when I ordered my prosound mod was too short ! :S

Offline
Minneapolis, MN

Handheld legend sells some 28 gage wire http://handheldlegend.com/collections/p … e-5-meters

Offline

I use ribbon cable ripped from old computers.

Offline

My mods have gone fine with wire from a sacrificed phone line. Have also used salvage from otherwise broken usb and Ethernet cables.

Offline

I bought a spool of wire wrapping wire that seems to work pretty well. It's thin and there is a lot of it, so it will probably last a while. If you have decent wire strippers it's pretty easy to strip as well.

Offline
NUMBSKULL

Just get yourself a bunch of different kind of this wire: http://www.ebay.com/itm/Stranded-indoor … 5d521f03f0

Shipping will take a while though.

Offline
Swansea, UK

I use chicken wire.

Offline
Aarhus, Denmark
donotrunwithpixels wrote:

I use chicken wire.

Hardcore as fuck

Offline
Detroit, Michigan
zii.hrs wrote:
donotrunwithpixels wrote:

I use chicken wire.

Hardcore as fuck

It's only hardcore if you use barbed wire for your mods

Offline
NUMBSKULL
snesei wrote:
zii.hrs wrote:

Hardcore as f***

It's only hardcore if you use barbed wire for your mods

Hahaha, it seems like I've heard that in the early days farmers built out rural telephone networks using their existing barbed wire fences. Pretty hardcore.

Offline
Dallas, Texas

I like solid core so I can bend it onto the most efficient rout point to point and it will retain it's shape.

Offline
Swansea, UK

I like Ben&Jerry's Core so I can eat it... because... it's tasty...

Offline
Taichung, Taiwan

30-gauge wrapping wire.

Offline

I use ipod charger cable wire. It's super thin, easy to work with, cheap ($2 or less, ebay, china) and you get 4 different colors in a 3.4 ft cable.
Good for all small solder point projects.

http://www.ebay.com/itm/301314613192?_t … EBIDX%3AIT

Last edited by Koji-Kendo (Apr 21, 2015 5:43 am)