anarkiwi wrote:Hi all,
Is this intentional? It does seem then that the rightmost 2 ACID digits don't do anything.
Thanks,
I tried it now and i also see it is difficult to understand what it does. In defMON wiki is this:
ACID cutoff set/slide
0000-7FFF cutoff set
8000-BFFF cutoff slide up
C000-FFFF cutoff slide down
so i created patch with lowpass filter at low set value in acid 0020, in next line i enter value 8000, so it is lowest slide up (also DL value i set to 70 to see how long it goes up), when i increase value in c (from acid) it is acting as LFO rate or something like this (wah-wah), so higher value, quicker wahwahing, i value (also from acid) seems to affect, how quickly is cutoff sliding up, in my case is at DL 70 optimal value 5 (it also may be acted as low LFO value, because on synthesizers is mostly LFO or additional envelope used to modulate parameters like filter sweeps), because until next line it goes filter almost to max frequency, and at next line i set C020, also at speed of DL 70 and filter is slowly closing, when i change waveform from pulse to noise, it is even better noticeable what it does (in my case it sounds exactly like Last Ninja III intro sounds haha).
https://youtu.be/NWRLxN_LC-0
Amelinium wrote:@martin_demsky What I meant is that sound-cluttering might not be related to speed but proper instrument restarting. 1) Be sure not to close the gate multiple times in a row, 2) 0F00 ADSR during restart while gate closed 0000 seems to give best results, 3) increasing delay values in the line(s) responsible for hardrestart (with 09 testbit or without it) might help.
1. but what else i can do? afaik only when you close the gate, is sustain and release from envelope performed, so if i want short quick noted in long sequence i must close the gate, aside of that of course i used sometimes patch, preferably originally designed as long lead pulse with variable width and rest of notes is written without instrument number, so first note is hard and other as slide notes, where pulsewidth is changing from first note and rest is only changing oscillator frequency.
2. that means if you use 0F00 in adsr, sr values are zeros and you dont need to close gate?
Last edited by martin_demsky (Dec 23, 2018 10:28 am)