exactly like the title says, i'm looking to buy/trade some items!
everything i'm looking for is listed below along with a price.
this is the price i'm willing to pay for the item, and also the amount in trade I'm willing to exchange from the KB shop.
if worked out in trade at all shipping is paid for by the shipper (both ways). if a purchase, i'll pick up shipping but at cost and a low rate.
we are located in North Carolina, USA.
PM or email me at matt [aatt] kitsch-bent [ddoott] com
items for trade
_________________________________
Help Making Tutorials
- simple. i have products which need tutorials. i have no time to properly devote to them, i find making them tedious and incredibly boring.
- i'm not sure how to compensate for this, it would just depend on the tutorial itself.
- i'd love to see some sort of reference to something which would pertain to this skill set... at least to show me you are an organized presenter and understand layout. and have a sense of aesthetics as well.
- format is (ideally) powerpoint with a PDF export (at least the powerpoint)
- picture taking is critical, i won't be supplying photos
- i'll send the item itself to you so you're able to make the tutorial. in most cases, you can keep the item as a form of payment, in some circumstances i'll need it back but am happy to pay for the return shipping. this applies mainly to very expensive or limited editions of things. of course, we can always work something out so just ask if you have a thought.
- i can provide the KB artwork and whatnot for the tutorial. you are more than welcome to include your name on the last page (where the KB info is too).
- format: front page, intro (what is it?), tools/mis en place (what do I need to do this? special considerations?), steps (how do I do this?), conclusion (what have i done?!?!), last page is KB banner/logo, contact info, and your info too.
THE TUTORIAL LIST:
-- prosound tutorials for RCA, 1/8", and 1/4". payment = 2x each kit (2x RCA, etc)
-- 3-clk install tutorial and demo (video). payment = 2x kit for install docs. vid to be negotiated (idea?)
-- i'll think of more...
Video/VJ Equipment -- price varies
- particularly interested in Leitch brand products (Digibus and StillFrame mostly)
- Ross Video, Grass Valley, Rosendahl, Sony, etc
- interested in switchers/mixers/decoders/encoders/TBC/sync generators
- preferably NTSC format devices (if this is applicable at all)
- preferably equipment for 19" racks
- ESPECIALLY LOOKING FOR RACK MOUNT LCDs!
*OFFICIAL* Nanovoice Cart
- the ones sold on the nanoloop site, not just the ROM on an eprom cart. the 'real' ones...
Clone/Fake Handheld Consoles
- especially interested in Game Boy type clones
- I am not listing a price i'd give for these, they range widely in price, please PM or email though! would love to discuss
- no, they do not need to be compatible with original carts, they can use a proprietary design
Cartridge Shells (Colored Versions)
- i need the shells only, don't need the game or a game sticker on the outside
- these are for color-matching plastics parts, so cleanliness is important
- i'm interested in any of the special colors Nintendo put out, AS WELL AS the fake/clone games with colored shells
- don't need white. really interested in a pink one especially, but ANY of the colors i'm looking for
- please PM me with your offer, I know the price will depend on the rarity of the shell
DMG Back PCBs -- @$3.00 each
- must have fully working CPU
- all buttons must still work (a common failure)
- i do NOT want the later versions where the CPU is covered in the epoxy blob
- must have link port
- power and audio PCB not required, but greatly preferred
- DMG-CPU revision doesn't matter
CGB PCBs -- @$3.50 each
- must have fully working CPU and have link port intact
- does NOT need to include LCD, at all
- *if* there is an epoxy blob over the CPU, do NOT want
MGB PCBs -- @$3.50 each
- must have fully working CPU and have link port intact
- does NOT need to include LCD, at all
- *if* there is an epoxy blob over the CPU, do NOT want
DMG-07 4-Player Adapter PCBs -- @$2.25 each
- or, $0.75 per link port if some are missing
- link ports cannot be damaged
- i do NOT need the wires, the case, anything else. just the PCB with the link ports.
_________________________________
hopefully some of you have a bunch of these since the LCD boards break so often!
if i left out any important details, please let me know.
just wanted to say, i'm interested,
I'm afraid I don't really know Powerpoint though. If it's useful to you, I can put the text file & all HQ pics in a zip file & send them to you if you'd like. Just let me know.
