Timbob
Offline
Bit wish wrote:

You need at least 3 hook up wires right? Whats post and pre pot? Does it matter if i have a prosound mod already installed?

You can install as many pro-sounds as you want. I wouldn't use them all at the same time tho.
you could install RCA and jackplug in one gameboy for example.

and post and pre pot is just as it says. before or after the volume pot.

if you install post pot, you can use the volume slider to control the prosound. see the pic i posted a few posts above.

Bit wish
Offline
New Albany Indiana
Timbob wrote:
Bit wish wrote:

You need at least 3 hook up wires right? Whats post and pre pot? Does it matter if i have a prosound mod already installed?

You can install as many pro-sounds as you want. I wouldn't use them all at the same time tho.
you could install RCA and jackplug in one gameboy for example.

and post and pre pot is just as it says. before or after the volume pot.

if you install post pot, you can use the volume slider to control the prosound. see the pic i posted a few posts above.

What happens if it inst hooked up to the volume slider?

Timbob
Offline

Max Volume Baby! yeah!

Bit wish
Offline
New Albany Indiana
Timbob wrote:

Max Volume Baby! yeah!

So your saying that it would just put it to the highest setting of the volume slider? So if i put my  prosound 1/8" on either pot or post, i have to put the RCA on the other?

Timbob
Offline

You ask too many questions.

snesei
Offline
Detroit, Michigan

I never put a ground on mine, I do internal prosound using the stock jack. Should I be grounding it?

DogTag
Offline
Murcia, Spain
snesei wrote:

I never put a ground on mine, I do internal prosound using the stock jack. Should I be grounding it?

Then you're probably just using 2 wires, which are the "left" and "right". The stock jack is already grounded, so there's no need to do anything else, I suppose.

Last edited by DogTag (Jan 28, 2013 9:47 pm)

Bit wish
Offline
New Albany Indiana

So if i put my  prosound 1/8" on either pot or post, i have to put the RCA on the other?

Timbob
Offline
Bit wish wrote:

So if i put my  prosound 1/8" on either pot or post, i have to put the RCA on the other?

Nope. you can connect 120 prosounds at post an pre pot. whatever you want. It's just advised to not use more then one at the same time.

DogTag
Offline
Murcia, Spain

You'll have a harder time soldering though xD

Bit wish
Offline
New Albany Indiana

Where do I connect the wires to the circuit board?
Where does ground go? Where does left and right go? (on the circuit board and on the jacks)

Timbob
Offline
Bit wish wrote:

Where do I connect the wires to the circuit board?
Where does ground go? Where does left and right go? (on the circuit board and on the jacks)

Did you even read this thread?

I posted pictures just a few posts back.

Bit wish
Offline
New Albany Indiana

Its bettter to be safe than sorry.