DMGer
Offline
Cincinnati, OH

So here's the kit:
http://getlofi.com/shop/ltc1799-precisi … h-control/

I'm assuming it would work but I'm not sure which trace to cut.

On this French site they used a LTC1799 so I'm assuming I should follow this.

http://furrtek.free.fr/?a=nesclock

But there's also this site...

http://kyorune.com/modding/article.php?id=67

So would I be able to install the kit? If so which trace should I cut?

yogi
Offline
Jelly Stone park, MD USA

Should work fine with either mod. The PCB should make your mod very easy.
You should be able to use the LTC with either mod. The first how-to over clocks the whole NES, both the CPU and the PPU;  the second is over clocking just the CPU. Which is better? IDK, but it seems like you could try both (one at a time) to test what you like the best.
I would def like to know what you find.
Yogi

DMGer
Offline
Cincinnati, OH

I might just add a switch between the two then sooner or later. Thanks!

bitjacker
Offline
Alive and well in fucksville

i bought a couple of these awhile back. i use mine in a dmg and its powerful enough to not need a trace cut

DMGer
Offline
Cincinnati, OH

Yeah I also used one in a DMG. My gut tells me the NES is different though. I'll install everything and cut the trace after and post results. wink

bitjacker
Offline
Alive and well in fucksville

did you use a trim resistor (dmg)? if so where and what value