Offline
Melbourne, Australia

Has this been done before or is it possible?
I'm assuming a white backlight would best because it wouldn't stuff up the colors.

Offline
NSW, Australia

It is indeed possible, I just can't seem to find a picture at the moment, sorry!

Offline
hardcore, Australia

GBCs I think need to be frontlit. Something about the way the colour lcd works.
You'd want something like this
http://www.mash-mods.com/products/Front … vices/fkl2

Apparently it can also be done with a frontlight salvaged from an SP.

Edit: http://forums.modretro.com/viewtopic.php?f=40&t=916 This thread on Modretro explains the process.

Last edited by godinpants (Jan 10, 2010 8:35 am)

Offline
Melbourne, Australia

thankyou godinpants

Also why do i keep press report thinking it will bring me to the reply page sad the reply box is right here

Offline
0R360N

Here is tutorial,
http://forums.modretro.com/viewtopic.php?f=40&t=916

here is my frontlit GBC (took about 30 minutes, and cost about 8 bucks)

Offline
California

I need to try doing something like this.

Offline
NSW, Australia
Thretris wrote:

Here is tutorial,
http://forums.modretro.com/viewtopic.php?f=40&t=916

here is my frontlit GBC (took about 30 minutes, and cost about 8 bucks)

Looks like you need to put some insulation tape on the inside of the case or something.

Offline
London, UK

I kinda like the light coming through the case!

Offline
0R360N
Sabrepulse wrote:

I kinda like the light coming through the case!

I do too, I also trimmed away the plastic under the COLOR logo, so light would shine through that too.

Offline
Milwaukee, Wisconsin USA

I'll be doing a few of these for my new live rig i think... same w/ gameboy pockets... smile 
Can't wait to start. smile

If i remember correctly it can be done w/ DS front lite kits too..

Offline
0R360N
low-gain wrote:

I'll be doing a few of these for my new live rig i think... same w/ gameboy pockets... smile 
Can't wait to start. smile

If i remember correctly it can be done w/ DS front lite kits too..

What DS is front it? unless the very first one was (cause I never had one) then I dont think any of them are. Hope this dont mean your not sending me those SPs now..lol sad

Offline
Philly, PA, USA

I was disassembling a gameboy color, and I ended up actually breaking a tiny little piece of the glass on the screen and the screen stopped working altogether, the glass on those things is real thin and fragile.

also in the tutorial it says use AGS-100, not 101, anyone know what the difference is?

Offline
0R360N

AGS-001 is the original  front lit GBASP from 2003

AGS-101 is the bright ass Backlit GBASP from 2005

Offline
Milan, Italy

got to do this when i'll find a broken (or cheap) SP. big_smile

Offline
Milan, Italy
Thretris wrote:

Here is tutorial,
http://forums.modretro.com/viewtopic.php?f=40&t=916

here is my frontlit GBC (took about 30 minutes, and cost about 8 bucks)

ok.
i'm doing this.
pretty easy till now. smile

in the tutorial there are a white cable (+V) and a black one (Ground).
where should i exactle solder them in the backlit module?

thanks.

Offline
Milwaukee, Wisconsin USA

i owned 2 mashmods... not impressed, blurry image.. Thretris's version is wonderful!