Litewall Art (Page 6 of 10)

I've been trying to draw a sheep for MK but it just looks like a fat dog.

Litewall + Decepticons

Litewall + Cobra

"NO! G.I. Joe was ready for us! How dare they anticipate my strategy!?!"

And more importantly, you can easily edit shapes by using YY-CHR in 1bpp mode.

blargg_litewall_10.zip

Forgot to mention, this one supports 16 shapes.
Hold B and press U/D/L/R for 1-4.
Hold B, press Select, then press U/D/L/R for 5-8.
Hold B, press Select x2, then press U/D/L/R for 9-12.
Hold B, press Select x3, then press U/D/L/R for 13-16.

Until you release B, Select just internally cycles to the next four, but doesn't change the current shape until you hit U/D/L/R. But once you release B, and hold it again, it internally starts back at the first set. This way, you can always quickly go to a known set by holding B, pressing Select the 0-3 times, and knowing exactly what set you're on, regardless of any Select presses before you just started holding B.

And also, I just duplicated the first 8 shapes and added some junk on them to be sure it was working. Plug in your own shapes!

Last edited by blargg (Aug 23, 2010 1:56 am)

here are the ones I made earlier today

Good job, Russolo.

I was just about to make a peace sign.

Hint - Try to leave a 2-3pixel black boarder around the left, right, and bottom of your designs if you can.

Last edited by SurfaceDragon (Aug 23, 2010 5:17 am)