PCB I would be up for! Should help me out if I manage to get a decent midi keyboard again!
Being a student makes you generally unable to buy pretty things.
Offline
Carbondale, IL
herr_prof wrote:
Am I correct in assuming that the pin headers there are for an ftdi cable? It can be used to update the software in the chip?
Indeed. All you need is the 5V FTDI cable or equivalent. For instance, I just had the pleasure to use one of these on a senior design project, and I have to say they work beautifully. Of course, if you are the type who looses small things, this model may be a bad idea.
Offline
Unsubscribe
What about just this cable?
http://www.adafruit.com/index.php?main_ … ucts_id=70
Also I sent you an email, lemme know if you received it.
Last edited by herr_prof (Oct 29, 2010 1:40 pm)
Offline
Carbondale, IL
That's the same cable I used to program each one. It will definitely work. Just be sure to line up the black wire with the GND label on the six pin header.
Last edited by scienceguy8 (Oct 31, 2010 4:43 am)
Offline
Los Angeles
scienceguy8 wrote:
That's the same cable I used to program each one. It will definitely work. Just be sure to line up the black wire with the GND label on the six pin header.
ELSE WILL SPLODE AND BLACK MAGIC ESCAPES
Offline
Unsubscribe
Which of the dropdown board settings do you choose in the arduino software?
Offline
Canada
herr_prof wrote:
Which of the dropdown board settings do you choose in the arduino software?
Which ATmega does it have inside?
Offline
Unsubscribe
my eyesight is really bad but it looks like the atmega 328p-pu