Hello, i'm new here.
I bought one caanoo for use with caanoo piggy tracker and I also bought the piggy to MIDI.(from kitch-bent)
I know it's for Gp2x and not for caanoo, but Thomas from firestarter say to me:
"I am not programming chips anymore, but there you can get one for sure. I sent marc a explanation of how the canoo could be connected. Though, i didn't test it and it is something you should try out. So i give no no guarantees that it works or that you kill your caanoo. Though, technically it is the same like the gp2x, just different pins...it should be fine, and i would do it aswell for sure if i would have a caanoo. Here is the info i sent to marc: I checked some info and it indeed looks like that you simply can use different pins and you are ready. Instead of pin 21 it is 4 or 5(both possible). Instead of 24 it is 12 or 19 (both possible). Instead of 23 it is 14. Instead of 22 it is 13.
The pins are compared to my gp2x schematics!!"
-From firestarter schema(GP2X)------>Midi/piggy from Kitch-bent---> WIZ=Caanoo EXT port(info from firestarter)
Pin 21> possitve power-------->Green = Pin 4 -----------------------> Pin 4 or 5
Pin 22>RXD-------------------->Brun = Pin 3 -----------------------> Pin 13
Pin 23>TXD-------------------->White = Pin 2 -----------------------> pin 14
Pin 24>Ground----------------->Black = pin 1 -----------------------> pin 12 or 19
I tried to like this but it does not work, i need your help.
Thanks you.
Harold / Osica