On arduinoboy > 1.2 you have to set force mode like that, AND alwaysUseDefaultSettings to true if the eeprom was already written to with previous settings.
boolean alwaysUseDefaultSettings = true; //set to true to always use the settings below, else they are pulled from memory for the software editor
boolean usbMode = false; //to use usb for serial communication as oppose to MIDI - sets baud rate to 38400
byte defaultMemoryMap[MEM_MAX] = {
0x7F,0x01,0x02,0x7F, //memory init check
0x01, //force mode (forces lsdj to be sl)
0x01, //mode
15, //sync effects midi channel (0-15 = 1-16)
15, //masterNotePositionMidiChannel - LSDJ in master mode will send its song position on the start button via midi note. (0-15 = 1-16)
15, //keyboardInstrumentMidiChannel - midi channel for keyboard instruments in lsdj. (0-15 = 1-16)
1, //Keyboard Compatability Mode
1, //Set to true if you want to have midi channel set the instrument number / doesnt do anything anymore
0,1,2,3, //midiOutNoteMessageChannels - midi channels for lsdj midi out note messages Default: channels 1,2,3,4
0,1,2,3, //midiOutCCMessageChannels - midi channels for lsdj midi out CC messages Default: channels 1,2,3,4
1,1,1,1, //midiOutCCMode - CC Mode, 0=use 1 midi CC, with the range of 00-6F, 1=uses 7 midi CCs with the
//range of 0-F (the command's first digit would be the CC#), either way the value is scaled to 0-127 on output
1,1,1,1, //midiOutCCScaling - CC Scaling- Setting to 1 scales the CC value range to 0-127 as oppose to lsdj's incomming 00-6F (0-112) or 0-F (0-15)
1,2,3,7,10,11,12, //pu1: midiOutCCMessageNumbers - CC numbers for lsdj midi out, if CCMode is 1, all 7 ccs are used per channel at the cost of a limited resolution of 0-F
1,2,3,7,10,11,12, //pu2
1,2,3,7,10,11,12, //wav
1,2,3,7,10,11,12, //noi
0, 1, 2, 3, 4, //mGB midi channels (0-15 = 1-16)
15, //livemap / sync map midi channel (0-15 = 1-16)
80,1, //midiout bit check delay & bit check delay multiplier
0,0//midiout byte received delay & byte received delay multiplier
};
