I'm pretty sure this is the official shirt for blip fest. wink

Got a new one in the works special for Blip11

Hoping to make a weekend trip out to visit some friends sometime in March.
Anyone interested in putting a show together?

if you want to come over sometime to use my shop you can.

180

(26 replies, posted in Commodore Computers)

akira^8GB wrote:
low-gain wrote:

>_< i'm just gunna walk away from this one...

Would have been useful if you explained why you would not use the easily available pads on the motherboard.


because you would have probably just disagreed with my reasons anyways? lulz heart  U Akira!

181

(29 replies, posted in Nintendo Consoles)

did you put the pot across the pins ? or ... output to one side, ground to the other, and the wiper to the "input" of your mix bus pin.. either way you should have a series resistor. that way you're simply making a voltage divider for the vrc6 output...before it goes to your mix pin or dedicated output.

if that didn't make sense.. i should just draw it. lol i'm tired.

182

(26 replies, posted in Commodore Computers)

>_< i'm just gunna walk away from this one...

183

(29 replies, posted in Nintendo Consoles)

i dont think you'll have a problem.  u got the skills wink

184

(26 replies, posted in Commodore Computers)

u need to buffer your output though if you plan to solder wires anywhere... just running the output pin to a jack puts your sid chip at risk.

185

(29 replies, posted in Nintendo Consoles)

u could always swing by too and i can install the stuff for ya as well.

186

(26 replies, posted in Commodore Computers)

get messiah + sid2sid then toss a C64/NESmod kit into it. and have a blast. wink
Just bi-pass the sid2sid output amp on the 2nd sid, and take the audio outputs direct to the inputs of the C64/NESmod board.

187

(29 replies, posted in Nintendo Consoles)

Theta_Frost wrote:

I think there is demand for it.  I've been waiting for it before I mod my NES.  big_smile

by demand i mean.... enough to make it worth Kitsch buying 30 or more of them from me at once. wink
hahaha

188

(29 replies, posted in Nintendo Consoles)

you can tap off the ground pin on the NESmod pcb if you wanted.
If i remember correctly i made the unused plain on the bottom of the PCB a ground plain.. so anything u see a lot of parts connecting to the same HUGE ground pin should work. but i'd  just solder it to the ground pin on the power connector... Pin 1.. Black wire connects to it.

fit it anywhere you can find a place. wink I put it next to the NESmod pcb. but i also drilled all 3 holes out at the same time so i knew they'd fit.

For those who missed the webcast..
or anyone who cares. lol
Big ups to 2PP for the Blip07 DVD. used to show what's going on in the rest of the world.
Duluth MN hasn't really heard of such craziness such as 8-bit had to show them people jam!


190

(18 replies, posted in General Discussion)

I'd be down.. gotta know the date well in advance and a couch to crash on. wink
MEGABUS!

logan at lowgain-audio dot com

yeah it was a last minute thing. We'll sort it out next time. wink

thanks for joining us!

it was a great show! lots of fun was had.