7F chain for mute
7F chain for mute
I use 7F Chains with FE Phrases as blank Chains.
Then I use 7D with FD with a K command on top of the phrases screen if I need to kill any notes.
00 chain for mute
i dont know why, most people would use that chain for something else hahah
Yep. 7F with FE phrases, with K command at the top. Always and forever.
i just make a new chain/phrase on the spot because i'm stupid and idgaf
00 are empty chains
7F empty chain with a K-CMD
Not one song is made by my own rules 100%, however.
Last edited by Jotie (May 14, 2012 9:50 pm)
7F-FE all the way, 7E for song stop, rest of the 70 set for drops, irregular patterns (2phrase chains in a 4phrase song), etc.
i used to use solid 70, not really sure why, guess the 0 stands out
now i just double tap A because I only ever need empty slots for the end of my song
00 with a K command for a blank chain
7F with c5 with K01 at the start of each channel for syncing when recording
Yep. 7F with FE phrases, with K command at the top. Always and forever.
Yep. 7E for blanks.
00 are empty chains
7F empty chain with a K-CMDNot one song is made by my own rules 100%, however.
This. Blank chains are more common (at least in the beginning) so I use 00 because that's the easiest.
Last edited by thnikk (May 14, 2012 10:48 pm)
00 for blank chain with a k command.
30 starts percussion
40 starts bass
20 usually is for pu2
00 / 00 is K-00 G-00, with a couple phrases at the bottom filled with instruments saved in them to keep them from being cleaned.
I use 7F chain for nothing, 7E for kill
or sometimes I put k2 on 7F
00 with a K command for a blank chain
7F with c5 with K01 at the start of each channel for syncing when recording